Skip to Content
  1. Products ...
  2. Mild Steel Pipework
  3. Iron Pipework
  4. Malleable Iron Fittings

Malleable Iron Fittings

Browse malleable iron fittings within iron pipework, organised by fitting type for quick selection.

Sort By Sort By: Featured
[MI-NB-BSP-BUS-80-20-BLK] DN80 X 20 (3" X 3/4" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

DN80 X 20 (3" X 3/4" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3" BSPP Female
Side 1 suits an outside diameter (OD) of: 88.9mm
Side 2 threaded: 3/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 26.9mm

Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.
(0)
£ 15.84
[MI-NB-BSP-BUS-80-25-BLK] DN80 X 25 (3" X 1" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

DN80 X 25 (3" X 1" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3" BSPP Female
Side 1 suits an outside diameter (OD) of: 88.9mm
Side 2 threaded: 1" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 33.4mm

Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.
(0)
£ 17.01
[MI-NB-BSP-BUS-80-32-BLK] DN80 X 32 (3" X 1.1/4" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

DN80 X 32 (3" X 1.1/4" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3" BSPP Female
Side 1 suits an outside diameter (OD) of: 88.9mm
Side 2 threaded: 1.1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 42.4mm

Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.
(0)
£ 17.01
[MI-NB-BSP-BUS-80-40-BLK] DN80 X 40 (3" X 1.1/2" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

DN80 X 40 (3" X 1.1/2" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3" BSPP Female
Side 1 suits an outside diameter (OD) of: 88.9mm
Side 2 threaded: 1.1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 48.3mm

Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.
(0)
£ 29.28
[MI-NB-BSP-BUS-80-50-BLK] DN80 X 50 (3" X 2" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

DN80 X 50 (3" X 2" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3" BSPP Female
Side 1 suits an outside diameter (OD) of: 88.9mm
Side 2 threaded: 2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 60.3mm

Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.
(0)
£ 12.69
[MI-NB-BSP-BUS-80-65-BLK] DN80 X 65 (3" X 2.1/2" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

DN80 X 65 (3" X 2.1/2" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3" BSPP Female
Side 1 suits an outside diameter (OD) of: 88.9mm
Side 2 threaded: 2.1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 76.2mm

Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.
(0)
£ 12.51
[MI-NB-BSP-BUS-100-40-BLK] DN100 X 40 (4" X 1.1/2" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

DN100 X 40 (4" X 1.1/2" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 4" BSPP Female
Side 1 suits an outside diameter (OD) of: 114.3mm
Side 2 threaded: 1.1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 48.3mm

Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.
(0)
£ 29.28
[MI-NB-BSP-BUS-100-50-BLK] DN100 X 50 (4" X 2" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

DN100 X 50 (4" X 2" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 4" BSPP Female
Side 1 suits an outside diameter (OD) of: 114.3mm
Side 2 threaded: 2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 60.3mm

Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.
(0)
£ 31.71
[MI-NB-BSP-BUS-100-65-BLK] DN100 X 65 (4" X 2.1/2" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

DN100 X 65 (4" X 2.1/2" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 4" BSPP Female
Side 1 suits an outside diameter (OD) of: 114.3mm
Side 2 threaded: 2.1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 76.2mm

Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.
(0)
£ 24.72
[MI-NB-BSP-BUS-100-80-BLK] DN100 X 80 (4" X 3" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

DN100 X 80 (4" X 3" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 4" BSPP Female
Side 1 suits an outside diameter (OD) of: 114.3mm
Side 2 threaded: 3" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 88.9mm

Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.
(0)
£ 22.53
[MI-NB-BSP-BEN-LR-FF-90-100-BLK] DN100 (4" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

DN100 (4" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 4" BSPP Female
Suits an outside diameter (OD) of: 114.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.
(0)
£ 139.08
[MI-NB-BSP-BEN-LR-FF-90-80-BLK] DN80 (3" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

DN80 (3" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 3" BSPP Female
Suits an outside diameter (OD) of: 88.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.
(0)
£ 73.32
[MI-NB-BSP-BEN-LR-FF-90-65-BLK] DN65 (2.1/2" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

DN65 (2.1/2" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 2.1/2" BSPP Female
Suits an outside diameter (OD) of: 76.2mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.
(0)
£ 58.35
[MI-NB-BSP-BEN-LR-FF-90-50-BLK] DN50 (2" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

DN50 (2" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 2" BSPP Female
Suits an outside diameter (OD) of: 60.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.
(0)
£ 19.56
[MI-NB-BSP-BEN-LR-FF-90-40-BLK] DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 1.1/2" BSPP Female
Suits an outside diameter (OD) of: 48.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.
(0)
£ 14.49
[MI-NB-BSP-BEN-LR-FF-90-32-BLK] DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 1.1/4" BSPP Female
Suits an outside diameter (OD) of: 42.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.
(0)
£ 11.46
[MI-NB-BSP-BEN-LR-FF-90-25-BLK] DN25 (1" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

DN25 (1" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 1" BSPP Female x Female
Suits an outside diameter (OD) of: 33.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.
(0)
£ 6.78
[MI-NB-BSP-BEN-LR-FF-90-20-BLK] DN20 (3/4" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

DN20 (3/4" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.
(0)
£ 4.02
[MI-NB-BSP-BEN-LR-FF-90-15-BLK] DN15 (1/2" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90

DN15 (1/2" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90

Both sides threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.
(0)
£ 2.64
[MI-NB-BSP-BEN-LR-FF-90-0-BLK] DN10 (3/8" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

DN10 (3/8" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.
(0)
£ 2.79
[MI-NB-BSP-BEN-LR-FF-90-8-BLK] DN8 (1/4" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

DN8 (1/4" NB) BSP BLACK MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 1/4" BSPP Female
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.
(0)
£ 2.40
[MI-NB-BSP-BEN-SR-FF-90-80-BLK] DN80 (3" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90°

DN80 (3" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90°

Both sides threaded: 3" BSPP Female
Suits an outside diameter (OD) of: 88.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.
(0)
£ 48.66
[MI-NB-BSP-BEN-SR-FF-90-65-BLK] DN65 (2.1/2" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90°

DN65 (2.1/2" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90°

Both sides threaded: 2.1/2" BSPP Female
Suits an outside diameter (OD) of: 76.2mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.
(0)
£ 38.94
[MI-NB-BSP-BEN-SR-FF-90-50-BLK] DN50 (2" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90°

DN50 (2" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90°

Both sides threaded: 2" BSPP Female
Suits an outside diameter (OD) of: 60.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.
(0)
£ 19.77
[MI-NB-BSP-BEN-SR-FF-90-40-BLK] DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90°

DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90°

Both sides threaded: 1.1/2" BSPP Female
Suits an outside diameter (OD) of: 48.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.
(0)
£ 10.44
[MI-NB-BSP-BEN-SR-FF-90-32-BLK] DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90°

DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90°

Both sides threaded: 1.1/4" BSPP Female
Suits an outside diameter (OD) of: 42.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.
(0)
£ 7.77
[MI-NB-BSP-BEN-SR-FF-90-25-BLK] DN25 (1" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90°

DN25 (1" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90°

Both sides threaded: 1" BSPP Female x Female
Suits an outside diameter (OD) of: 33.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.
(0)
£ 5.19
[MI-NB-BSP-BEN-SR-FF-90-20-BLK] DN20 (3/4" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90°

DN20 (3/4" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90°

Both sides threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.
(0)
£ 3.69
[MI-NB-BSP-BEN-SR-FF-90-15-BLK] DN15 (1/2" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90

DN15 (1/2" NB) BSP BLACK MALLEABLE IRON FXF SHORT RADIUS BEND 90

Both sides threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.
(0)
£ 2.40
[MI-NB-BSP-BEN-FF-45-80-BLK] DN80 (3" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

DN80 (3" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

Both sides threaded: 3" BSPP Female
Suits an outside diameter (OD) of: 88.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, 45°, Bend, Figure 41, Screwed, Fittings.
(0)
£ 51.06
[MI-NB-BSP-BEN-FF-45-65-BLK] DN65 (2.1/2" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

DN65 (2.1/2" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

Both sides threaded: 2.1/2" BSPP Female
Suits an outside diameter (OD) of: 76.2mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, 45°, Bend, Figure 41, Screwed, Fittings.
(0)
£ 40.02
[MI-NB-BSP-BEN-FF-45-50-BLK] DN50 (2" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

DN50 (2" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

Both sides threaded: 2" BSPP Female
Suits an outside diameter (OD) of: 60.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, 45°, Bend, Figure 41, Screwed, Fittings.
(0)
£ 20.64
[MI-NB-BSP-BEN-FF-45-40-BLK] DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

Both sides threaded: 1.1/2" BSPP Female
Suits an outside diameter (OD) of: 48.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, 45°, Bend, Figure 41, Screwed, Fittings.
(0)
£ 14.19
[MI-NB-BSP-BEN-FF-45-32-BLK] DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

Both sides threaded: 1.1/4" BSPP Female
Suits an outside diameter (OD) of: 42.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, 45°, Bend, Figure 41, Screwed, Fittings.
(0)
£ 10.80
[MI-NB-BSP-BEN-FF-45-25-BLK] DN25 (1" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

DN25 (1" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

Both sides threaded: 1" BSPP Female x Female
Suits an outside diameter (OD) of: 33.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, 45°, Bend, Figure 41, Screwed, Fittings.
(0)
£ 6.09
[MI-NB-BSP-BEN-FF-45-20-BLK] DN20 (3/4" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

DN20 (3/4" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

Both sides threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, 45°, Bend, Figure 41, Screwed, Fittings.
(0)
£ 4.77
[MI-NB-BSP-BEN-FF-45-15-BLK] DN15 (1/2" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

DN15 (1/2" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

Both sides threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, 45°, Bend, Figure 41, Screwed, Fittings.
(0)
£ 3.78
[MI-NB-BSP-BEN-FF-45-10-BLK] DN10 (3/8" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

DN10 (3/8" NB) BSP BLACK MALLEABLE IRON FXF BEND 45°

Both sides threaded: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, 45°, Bend, Figure 41, Screwed, Fittings.
(0)
£ 4.02
[MI-NB-BSP-BEN-LR-MF-90-100-BLK] DN100 (4" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

DN100 (4" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 4" BSPP Female
Suits an outside diameter (OD) of: 114.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.
(0)
£ 135.09
[MI-NB-BSP-BEN-LR-MF-90-80-BLK] DN80 (3" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

DN80 (3" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 3" BSPP Female
Suits an outside diameter (OD) of: 88.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.
(0)
£ 74.37
[MI-NB-BSP-BEN-LR-MF-90-65-BLK] DN65 (2.1/2" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

DN65 (2.1/2" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 2.1/2" BSPP Female
Suits an outside diameter (OD) of: 76.2mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.
(0)
£ 57.45
[MI-NB-BSP-BEN-LR-MF-90-50-BLK] DN50 (2" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

DN50 (2" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 2" BSPP Female
Suits an outside diameter (OD) of: 60.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.
(0)
£ 23.04
[MI-NB-BSP-BEN-LR-MF-90-40-BLK] DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 1.1/2" BSPP Female
Suits an outside diameter (OD) of: 48.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.
(0)
£ 14.10
[MI-NB-BSP-BEN-LR-MF-90-32-BLK] DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 1.1/4" BSPP Female
Suits an outside diameter (OD) of: 42.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.
(0)
£ 10.50
[MI-NB-BSP-BEN-LR-MF-90-25-BLK] DN25 (1" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

DN25 (1" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 1" BSPP Female x Female
Suits an outside diameter (OD) of: 33.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.
(0)
£ 6.24
[MI-NB-BSP-BEN-LR-MF-90-20-BLK] DN20 (3/4" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

DN20 (3/4" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.
(0)
£ 4.83
[MI-NB-BSP-BEN-LR-MF-90-15-BLK] DN15 (1/2" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90

DN15 (1/2" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90

Both sides threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.
(0)
£ 2.82
[MI-NB-BSP-BEN-LR-MF-90-10-BLK] DN10 (3/8" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

DN10 (3/8" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.
(0)
£ 2.55
[MI-NB-BSP-BEN-LR-MF-90-8-BLK] DN8 (1/4" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

DN8 (1/4" NB) BSP BLACK MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 1/4" BSPP Female
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.
(0)
£ 2.28
[MI-NB-BSP-BEN-MF-45-80-BLK] DN80 (3" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

DN80 (3" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

Both sides threaded: 3" BSPP Female
Suits an outside diameter (OD) of: 88.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Street, MXF, MF, 45°, Bend, Figure 40, Screwed, Fittings.
(0)
[MI-NB-BSP-BEN-MF-45-65-BLK] DN65 (2.1/2" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

DN65 (2.1/2" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

Both sides threaded: 2.1/2" BSPP Female
Suits an outside diameter (OD) of: 76.2mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Street, MXF, MF, 45°, Bend, Figure 40, Screwed, Fittings.
(0)
[MI-NB-BSP-BEN-MF-45-50-BLK] DN50 (2" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

DN50 (2" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

Both sides threaded: 2" BSPP Female
Suits an outside diameter (OD) of: 60.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Street, MXF, MF, 45°, Bend, Figure 40, Screwed, Fittings.
(0)
[MI-NB-BSP-BEN-MF-45-40-BLK] DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

Both sides threaded: 1.1/2" BSPP Female
Suits an outside diameter (OD) of: 48.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Street, MXF, MF, 45°, Bend, Figure 40, Screwed, Fittings.
(0)
[MI-NB-BSP-BEN-MF-45-32-BLK] DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

Both sides threaded: 1.1/4" BSPP Female
Suits an outside diameter (OD) of: 42.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Street, MXF, MF, 45°, Bend, Figure 40, Screwed, Fittings.
(0)
£ 9.63
[MI-NB-BSP-BEN-MF-45-25-BLK] DN25 (1" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

DN25 (1" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

Both sides threaded: 1" BSPP Female x Female
Suits an outside diameter (OD) of: 33.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Street, MXF, MF, 45°, Bend, Figure 40, Screwed, Fittings.
(0)
£ 5.61
[MI-NB-BSP-BEN-MF-45-20-BLK] DN20 (3/4" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

DN20 (3/4" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

Both sides threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Street, MXF, MF, 45°, Bend, Figure 40, Screwed, Fittings.
(0)
£ 3.93
[MI-NB-BSP-BEN-MF-45-15-BLK] DN15 (1/2" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

DN15 (1/2" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

Both sides threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Street, MXF, MF, 45°, Bend, Figure 40, Screwed, Fittings.
(0)
£ 2.97
[MI-NB-BSP-BEN-MF-45-10-BLK] DN10 (3/8" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

DN10 (3/8" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

Both sides threaded: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Street, MXF, MF, 45°, Bend, Figure 40, Screwed, Fittings.
(0)
£ 3.12
[MI-NB-BSP-BEN-MF-45-8-BLK] DN8 (1/4" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

DN8 (1/4" NB) BSP BLACK MALLEABLE IRON MXF BEND 45°

Both sides threaded: 1/4" BSPP Female
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Street, MXF, MF, 45°, Bend, Figure 40, Screwed, Fittings.
(0)
£ 3.36
[MI-NB-BSP-PLU-100-BLK] DN100 (4" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

DN100 (4" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

Threaded: 4" BSPT Male
Suits an outside diameter (OD) of: 114.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 22.29
[MI-NB-BSP-PLU-80-BLK] DN80 (3" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

DN80 (3" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

Threaded: 3" BSPT Male
Suits an outside diameter (OD) of: 88.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 12.60
[MI-NB-BSP-PLU-65-BLK] DN65 (2.1/2" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

DN65 (2.1/2" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

Threaded: 2.1/2" BSPT Male
Suits an outside diameter (OD) of: 76.2mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 9.72
[MI-NB-BSP-PLU-50-BLK] DN50 (2" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

DN50 (2" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

Threaded: 2" BSPT Male
Suits an outside diameter (OD) of: 60.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 4.26
[MI-NB-BSP-PLU-40-BLK] DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

Threaded: 1.1/2" BSPT Male
Suits an outside diameter (OD) of: 48.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 2.46
[MI-NB-BSP-PLU-32-BLK] DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

Threaded: 1.1/4" BSPT Male
Suits an outside diameter (OD) of: 42.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 2.40
[MI-NB-BSP-PLU-25-BLK] DN25 (1" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

DN25 (1" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

Threaded: 1" BSPT Male
Suits an outside diameter (OD) of: 33.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 1.26
[MI-NB-BSP-PLU-20-BLK] DN20 (3/4" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

DN20 (3/4" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

Threaded: 3/4" BSPT Male
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 0.99
[MI-NB-BSP-PLU-15-BLK] DN15 (1/2" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

DN15 (1/2" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

Threaded: 1/2" BSPT Male
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 0.87
[MI-NB-BSP-PLU-10-BLK] DN10 (3/8" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

DN10 (3/8" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

Threaded: 3/8" BSPT Male
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 0.90
[MI-NB-BSP-PLU-8-BLK] DN8 (1/4" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

DN8 (1/4" NB) BSP BLACK MALLEABLE IRON HOLLOW PLUG

Threaded: 1/4" BSPT Male
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 0.99
[MI-NB-BSP-PLU-50-BLK-SOL] DN50 (2" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

DN50 (2" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

Threaded: 2" BSPT Male
Suits an outside diameter (OD) of: 60.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 16.35
[MI-NB-BSP-PLU-40-BLK-SOL] DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

Threaded: 1.1/2" BSPT Male
Suits an outside diameter (OD) of: 48.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 9.90
[MI-NB-BSP-PLU-32-BLK-SOL] DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

Threaded: 1.1/4" BSPT Male
Suits an outside diameter (OD) of: 42.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 7.14
[MI-NB-BSP-PLU-25-BLK-SOL] DN25 (1" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

DN25 (1" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

Threaded: 1" BSPT Male
Suits an outside diameter (OD) of: 33.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 6.78
[MI-NB-BSP-PLU-20-BLK-SOL] DN20 (3/4" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

DN20 (3/4" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

Threaded: 3/4" BSPT Male
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 3.96
[MI-NB-BSP-PLU-15-BLK-SOL] DN15 (1/2" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

DN15 (1/2" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

Threaded: 1/2" BSPT Male
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 2.55
[MI-NB-BSP-PLU-10-BLK-SOL] DN10 (3/8" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

DN10 (3/8" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

Threaded: 3/8" BSPT Male
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 1.92
[MI-NB-BSP-PLU-8-BLK-SOL] DN8 (1/4" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

DN8 (1/4" NB) BSP BLACK MALLEABLE IRON SOLID PLUG

Threaded: 1/4" BSPT Male
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 1.92
[MI-NB-BSP-CAP-R-100-BLK] DN100 (4" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

DN100 (4" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

Threaded: 4" BSPP Female
Suits an outside diameter (OD) of: 114.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.
(0)
£ 25.44
[MI-NB-BSP-CAP-R-80-BLK] DN80 (3" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

DN80 (3" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

Threaded: 3" BSPP Female
Suits an outside diameter (OD) of: 88.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.
(0)
£ 11.85
[MI-NB-BSP-CAP-R-65-BLK] DN65 (2.1/2" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

DN65 (2.1/2" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

Threaded: 2.1/2" BSPP Female
Suits an outside diameter (OD) of: 76.2mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.
(0)
£ 10.83
[MI-NB-BSP-CAP-R-50-BLK] DN50 (2" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

DN50 (2" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

Threaded: 2" BSPP Female
Suits an outside diameter (OD) of: 60.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.
(0)
£ 5.52
[MI-NB-BSP-CAP-R-40-BLK] DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

DN40 (1.1/2" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

Threaded: 1.1/2" BSPP Female
Suits an outside diameter (OD) of: 48.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.
(0)
£ 3.15
[MI-NB-BSP-CAP-R-32-BLK] DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

DN32 (1.1/4" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

Threaded: 1.1/4" BSPP Female
Suits an outside diameter (OD) of: 42.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.
(0)
£ 2.43
[MI-NB-BSP-CAP-R-25-BLK] DN25 (1" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

DN25 (1" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

Threaded: 1" BSPP Female x Female
Suits an outside diameter (OD) of: 33.4mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Screwed, Figure 185, Fittings.
(0)
£ 1.62
[MI-NB-BSP-CAP-R-20-BLK] DN20 (3/4" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

DN20 (3/4" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

Threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.
(0)
£ 1.35
[MI-NB-BSP-CAP-R-15-BLK] DN15 (1/2" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

DN15 (1/2" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

Threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.
(0)
£ 1.11
[MI-NB-BSP-CAP-R-10-BLK] DN10 (3/8" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

DN10 (3/8" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

Threaded: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.
(0)
£ 1.11
[MI-NB-BSP-CAP-R-8-BLK] DN8 (1/4" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

DN8 (1/4" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

Threaded: 1/4" BSPP Female
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.
(0)
£ 1.14
[MI-NB-BSP-CAP-R-6-BLK] DN6 (1/8" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

DN6 (1/8" NB) BSP BLACK MALLEABLE IRON ROUND CAP END

Threaded: 1/8" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.
(0)
£ 2.94
[MI-NB-BSP-PLU-15-GAL-SOL] DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON SOLID PLUG

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON SOLID PLUG

Threaded: 1/2" BSPT Male
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 2.58
[MI-NB-BSP-PLU-15-GAL] DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Threaded: 1/2" BSPT Male
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.
(0)
£ 1.05
[MI-NB-BSP-SOC-RED-100-80-GAL] DN100 X 80 (4" X 3" NB) BSP GALVANISED MALLEABLE IRON REDUCING SOCKET

DN100 X 80 (4" X 3" NB) BSP GALVANISED MALLEABLE IRON REDUCING SOCKET

Side 1 threaded: 4" BSPP Female
Suits 1 suits an outside diameter (OD) of: 114.3mm
Side 2 threaded: 3" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 88.9mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Socket, Concentric, Coupling, Connector, Threaded, Screwed, Figure 240, Fittings.
(0)
£ 77.73
[MI-NB-BSP-TEE-RB-100-80-GAL] DN100 X 80 (4" X 3" NB) BSP GALVANISED MALLEABLE IRON REDUCING BRANCH TEE

DN100 X 80 (4" X 3" NB) BSP GALVANISED MALLEABLE IRON REDUCING BRANCH TEE

Run threads: 4" BSPP Female
Suits an outside diameter (OD) of: 114.3mm
Branch Thread: 3" BSPP Female
Suits an outside diameter (OD) of: 88.9mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Branch, Tee, Threaded, Screwed
(0)
£ 85.77
[MI-NB-BSP-BUS-100-65-GAL] DN100 X 65 (4" X 2.1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

DN100 X 65 (4" X 2.1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 4" BSPP Female
Side 1 suits an outside diameter (OD) of: 114.3mm
Side 2 threaded: 2.1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 76.2mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.
(0)
£ 30.36
[MI-NB-BSP-BUS-100-50-GAL] DN100 X 50 (4" X 2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

DN100 X 50 (4" X 2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 4" BSPP Female
Side 1 suits an outside diameter (OD) of: 114.3mm
Side 2 threaded: 2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 60.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.
(0)
£ 37.65
[MI-NB-BSP-TEE-RB-100-50-GAL] DN100 X 50 (4" X 2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BRANCH TEE

DN100 X 50 (4" X 2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BRANCH TEE

Run threads: 4" BSPP Female
Suits an outside diameter (OD) of: 114.3mm
Branch Thread: 2" BSPP Female
Suits an outside diameter (OD) of: 60.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Branch, Tee, Threaded, Screwed
(0)
£ 80.67
[MI-NB-BSP-BUS-100-40-GAL] DN100 X 40 (4" X 1.1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

DN100 X 40 (4" X 1.1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 4" BSPP Female
Side 1 suits an outside diameter (OD) of: 114.3mm
Side 2 threaded: 1.1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 48.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.
(0)
£ 35.97
[MI-NB-BSP-TEE-RB-100-40-GAL] DN100 X 40 (4" X 1.1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BRANCH TEE

DN100 X 40 (4" X 1.1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BRANCH TEE

Run threads: 4" BSPP Female
Suits an outside diameter (OD) of: 114.3mm
Branch Thread: 1.1/2" BSPP Female
Suits an outside diameter (OD) of: 48.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Branch, Tee, Threaded, Screwed
(0)
£ 94.32
[MI-NB-BSP-SOC-100-GAL] DN100 (4" NB) BSP GALVANISED MALLEABLE IRON SOCKET

DN100 (4" NB) BSP GALVANISED MALLEABLE IRON SOCKET

Both sides threaded: 4" BSPP Female x Female
Suits an outside diameter (OD) of: 114.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Socket, Coupling, Connector, Straight, Threaded, Screwed, Figure 220, Fittings.
(0)
£ 60.06