Malleable Iron Fittings | Integraflow UK

DN25 (1" NB) BSP GALVANISED MALLEABLE IRON EQUAL TEE

All sides threaded: 1" BSPP Female
Suits an outside diameter (OD) of: 33.4mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Screwed, Figure 130, Fittings.

(0)

£ 4.41

DN20 X 15 (3/4" X 1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING SOCKET

Side 1 threaded: 3/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 26.9mm

Side 2 threaded: 1/2" BSPP Female
Side 2 suits an outside diameter (OD) of: 21.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Socket, Concentric, Coupling, Connector, Threaded, Screwed, Figure 240, Fittings.

(0)

£ 2.13

DN20 X 15 (3/4" X 1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING HEX NIPPLE

Side 1 Thread: 3/4" BSPT Male x Male
Suits an outside diameter (OD) of: 26.9mm
Side 2 Thread: 1/2" BSPT Male x Male
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Reducing Heagon Nipple, Malleable, Iron, Threaded, Screwed, Figure 245, Fittings.

(0)

£ 2.61

DN20 X 15 (3/4" X 1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 26.9mm
Side 2 threaded: 1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 21.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

(0)

£ 1.47

DN20 X 10 (3/4" X 3/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING SOCKET

Side 1 threaded: 3/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 26.9mm

Side 2 threaded: 3/8" BSPP Female
Side 2 suits an outside diameter (OD) of: 17.15mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Socket, Concentric, Coupling, Connector, Threaded, Screwed, Figure 240, Fittings.

(0)

£ 2.70

DN20 X 10 (3/4" X 3/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING HEX NIPPLE

Side 1 Thread: 3/4" BSPT Male x Male
Suits an outside diameter (OD) of: 26.9mm
Side 2 Thread: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Reducing Heagon Nipple, Malleable, Iron, Threaded, Screwed, Figure 245, Fittings.

(0)

£ 4.62

DN20 X 10 (3/4" X 3/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 26.9mm
Side 2 threaded: 3/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 17.15mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

(0)

£ 1.68

DN20 X 10 (3/4" X 3/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BRANCH TEE

Run threads: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Branch Thread: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Branch, Tee, Threaded, Screwed

(0)

£ 3.72

DN20 X 10 (3/4" X 1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BRANCH TEE

Run threads: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Branch Thread: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Branch, Tee, Threaded, Screwed

(0)

£ 3.45

DN20 X 8 (3/4" X 1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING SOCKET

Side 1 threaded: 3/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 26.9mm

Side 2 threaded: 1/4" BSPP Female
Side 2 suits an outside diameter (OD) of: 13.72mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Socket, Concentric, Coupling, Connector, Threaded, Screwed, Figure 240, Fittings.

(0)

£ 2.58

DN20 X 8 (3/4" X 1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 26.9mm
Side 2 threaded: 1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 13.72mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

(0)

£ 2.22

DN20 X 6 (3/4" X 1/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 26.9mm
Side 2 threaded: 1/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

(0)

£ 2.22

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON SOLID PLUG

Threaded: 3/4" BSPT Male
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.

(0)

£ 3.96

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON SOCKET

Both sides threaded: 3/4" BSPP Female x Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Socket, Coupling, Connector, Straight, Threaded, Screwed, Figure 220, Fittings.

(0)

£ 1.68

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON ROUND CAP END

Threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.

(0)

£ 1.62

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON MXF STREET UNION

Both sides threaded: 3/4" BSPT Male x BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Union, MXF, Street, Threaded, Screwed, Figure 341, Fittings.

(0)

£ 9.24

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON MXF STREET ELBOW 90°

Side One Thread: 3/4" BSPP Female
Side Two Thread: 3/4" BSPT Male
Both Sides Suit an Outside Diameter (OD) of: 26.9mm
Male x Female Elbow, Also known as a 'Street Elbow '
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, MXF, Male x Female Screwed, Figure 90 MF, Fittings.

(0)

£ 2.43

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON MXF STREET ELBOW 45°

Both sides threaded: 3/4" BSPT Male x BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Compressed Air, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable 45°, 45 Degree, MxF, MF, Male x Female, Street, Malleable Iron, Threaded, Screwed, Figure 121, Fittings.

(0)

£ 4.56

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.

(0)

£ 5.61

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON MXF BEND 45°

Both sides threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Street, MXF, MF, 45°, Bend, Figure 40, Screwed, Fittings.

(0)

£ 5.13

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Threaded: 3/4" BSPT Male
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.

(0)

£ 1.20

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON HEX NIPPLE

Both sides threaded: 3/4" BSPT Male x Male
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Screwed, Figure 280, Fittings.

(0)

£ 1.68

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON FXF UNION

Both sides threaded: 3/4" BSPP Female x Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Union, FXF, Threaded, Screwed, Figure 340, Fittings.

(0)

£ 7.98

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON FXF SHORT RADIUS BEND 90°

Both sides threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.

(0)

£ 4.05

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.

(0)

£ 5.70

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON FXF ELBOW 90°

Both sides threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 90, Screwed, Fittings.

(0)

£ 2.16

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON FXF ELBOW 45°

Both sides threaded: 3/4" BSPP Female x Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Compressed Air, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable 45°, 45 Degree, Malleable Iron, Threaded, Screwed, Figure 120, Fittings.

(0)

£ 4.35

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON FXF BEND 45°

Both sides threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, 45°, Bend, Figure 41, Screwed, Fittings.

(0)

£ 5.55

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON EQUAL TEE

All sides threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Screwed, Figure 130, Fittings.

(0)

£ 2.79

DN15 X 8 (1/2" X 1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING HEX NIPPLE

Side 1 Thread: 1/2" BSPT Male x Male
Suits an outside diameter (OD) of: 21.3mm
Side 2 Thread: 1/4" BSPT Male x Male
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Reducing Heagon Nipple, Malleable, Iron, Threaded, Screwed, Figure 245, Fittings.

(0)

£ 3.15

DN15 X 8 (1/2" X 1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BRANCH TEE

Run threads: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Branch Thread: 1/4" BSPP Female
Suits an outside diameter (OD) of: 13.72mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Branch, Tee, Threaded, Screwed

(0)

£ 3.93

DN15 X 10 (1/2" X 3/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING SOCKET

Side 1 threaded: 1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 21.3mm

Side 2 threaded: 3/8" BSPP Female
Side 2 suits an outside diameter (OD) of: 17.15mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Socket, Concentric, Coupling, Connector, Threaded, Screwed, Figure 240, Fittings.

(0)

£ 3.45

DN15 X 10 (1/2" X 3/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING HEX NIPPLE

Side 1 Thread: 1/2" BSPT Male x Male
Suits an outside diameter (OD) of: 21.3mm
Side 2 Thread: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Reducing Heagon Nipple, Malleable, Iron, Threaded, Screwed, Figure 245, Fittings.

(0)

£ 2.88

DN15 X 10 (1/2" X 3/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 21.3mm
Side 2 threaded: 3/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 17.15mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

(0)

£ 1.26

DN15 X 10 (1/2" X 3/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BRANCH TEE

Run threads: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Branch Thread: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Branch, Tee, Threaded, Screwed

(0)

£ 3.00

DN15 X 8 (1/2" X 1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING SOCKET

Side 1 threaded: 1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 21.3mm

Side 2 threaded: 1/4" BSPP Female
Side 2 suits an outside diameter (OD) of: 13.72mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Socket, Concentric, Coupling, Connector, Threaded, Screwed, Figure 240, Fittings.

(0)

£ 2.37

DN15 X 6 (1/2" X 1/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 21.3mm
Side 2 threaded: 1/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

(0)

£ 2.88

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON SOCKET

Both sides threaded: 1/2" BSPP Female x Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Socket, Coupling, Connector, Straight, Threaded, Screwed, Figure 220, Fittings.

(0)

£ 1.35

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON ROUND CAP END

Threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.

(0)

£ 1.38

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON MXF STREET UNION

Both sides threaded: 1/2" BSPT Male x BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Union, MXF, Street, Threaded, Screwed, Figure 341, Fittings.

(0)

£ 7.14

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON MXF STREET ELBOW 90°

Side One Thread: 1/2" BSPP Female
Side Two Thread: 1/2" BSPT Male
Both Sides Suit an Outside Diameter (OD) of: 21.3mm
Male x Female Elbow, Also known as a 'Street Elbow '
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, MXF, Male x Female Screwed, Figure 90 MF, Fittings.

(0)

£ 1.71

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON MXF STREET ELBOW 45°

Both sides threaded: 1/2" BSPT Male x BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Compressed Air, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable 45°, 45 Degree, MxF, MF, Male x Female, Street, Malleable Iron, Threaded, Screwed, Figure 121, Fittings.

(0)

£ 3.63

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON MXF LONG RADIUS BEND 90

Both sides threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.

(0)

£ 3.21

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON MXF BEND 45°

Both sides threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Street, MXF, MF, 45°, Bend, Figure 40, Screwed, Fittings.

(0)

£ 3.15

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON HEX NIPPLE

Both sides threaded: 1/2" BSPT Male x Male
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Screwed, Figure 280, Fittings.

(0)

£ 1.29

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON FXF UNION

Both sides threaded: 1/2" BSPP Female x Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Union, FXF, Threaded, Screwed, Figure 340, Fittings.

(0)

£ 6.60

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON FXF SHORT RADIUS BEND 90

Both sides threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.

(0)

£ 2.91

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON FXF LONG RADIUS BEND 90

Both sides threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.

(0)

£ 3.63

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON FXF ELBOW 90

Both sides threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 90, Screwed, Fittings.

(0)

£ 1.53

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON FXF ELBOW 45°

Both sides threaded: 1/2" BSPP Female x Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Compressed Air, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable 45°, 45 Degree, Malleable Iron, Threaded, Screwed, Figure 120, Fittings.

(0)

£ 3.45

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON FXF BEND 45°

Both sides threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, 45°, Bend, Figure 41, Screwed, Fittings.

(0)

£ 4.26

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON EQUAL TEE

All sides threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Screwed, Figure 130, Fittings.

(0)

£ 1.98

DN10 X 8 (3/8" X 1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING SOCKET

Side 1 threaded: 3/8" BSPP Female
Side 1 suits an outside diameter (OD) of: 17.15mm

Side 2 threaded: 1/4" BSPP Female
Side 2 suits an outside diameter (OD) of: 13.72mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Socket, Concentric, Coupling, Connector, Threaded, Screwed, Figure 240, Fittings.

(0)

£ 2.25

DN10 X 8 (3/8" X 1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING HEX NIPPLE

Side 1 Thread: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Side 2 Thread: 1/4" BSPT Male x Male
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Reducing Heagon Nipple, Malleable, Iron, Threaded, Screwed, Figure 245, Fittings.

(0)

£ 2.58

DN10 X 8 (3/8" X 1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BRANCH TEE

Run threads: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.12mm
Branch Thread: 1/4" BSPP Female
Suits an outside diameter (OD) of: 13.72mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Branch, Tee, Threaded, Screwed

(0)

£ 4.77

DN10 X 6 (3/8" X 1/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING HEX NIPPLE

Side 1 Thread: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Side 2 Thread: 1/8" BSPT Male x Male
Suits an outside diameter (OD) of: 10.29mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Reducing Heagon Nipple, Malleable, Iron, Threaded, Screwed, Figure 245, Fittings.

(0)

DN10 X 8 (3/8" X 1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/8" BSPP Female
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 13.72mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

(0)

£ 1.35

DN10 X 6 (3/8" X 1/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/8" BSPP Female
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

(0)

£ 2.16

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON SOLID PLUG

Threaded: 3/8" BSPT Male
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.

(0)

£ 2.04

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON SOCKET

Both sides threaded: 3/8" BSPP Female x Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Socket, Coupling, Connector, Straight, Threaded, Screwed, Figure 220, Fittings.

(0)

£ 1.68

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON ROUND CAP END

Threaded: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.

(0)

£ 1.26

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON MXF STREET UNION

Both sides threaded: 3/8" BSPT Male x BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Union, MXF, Street, Threaded, Screwed, Figure 341, Fittings.

(0)

£ 5.88

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON MXF STREET ELBOW 90°

Side One Thread: 3/8" BSPP Female
Side Two Thread: 3/8" BSPT Male
Both Sides Suit an Outside Diameter (OD) of: 17.15mm
Male x Female Elbow, Also known as a 'Street Elbow '
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, MXF, Male x Female Screwed, Figure 90 MF, Fittings.

(0)

£ 4.02

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON MXF STREET ELBOW 45°

Both sides threaded: 3/8" BSPT Male x BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Compressed Air, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable 45°, 45 Degree, MxF, MF, Male x Female, Street, Malleable Iron, Threaded, Screwed, Figure 121, Fittings.

(0)

£ 4.02

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.

(0)

£ 3.27

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON MXF BEND 45°

Both sides threaded: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Street, MXF, MF, 45°, Bend, Figure 40, Screwed, Fittings.

(0)

£ 3.96

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Threaded: 3/8" BSPT Male
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.

(0)

£ 0.96

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON HEX NIPPLE

Both sides threaded: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Screwed, Figure 280, Fittings.

(0)

£ 2.07

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON FXF UNION

Both sides threaded: 3/8" BSPP Female x Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Union, FXF, Threaded, Screwed, Figure 340, Fittings.

(0)

£ 6.96

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.

(0)

£ 3.39

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON FXF ELBOW 90°

Both sides threaded: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 90, Screwed, Fittings.

(0)

£ 1.71

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON FXF ELBOW 45°

Both sides threaded: 3/8" BSPP Female x Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Compressed Air, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable 45°, 45 Degree, Malleable Iron, Threaded, Screwed, Figure 120, Fittings.

(0)

£ 4.77

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON FXF BEND 45°

Both sides threaded: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, 45°, Bend, Figure 41, Screwed, Fittings.

(0)

£ 4.20

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON EQUAL TEE

All sides threaded: 3/5" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Screwed, Figure 130, Fittings.

(0)

£ 2.25

DN8 X 6 (1/4" X 1/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING SOCKET

Side 1 threaded: 1/4" BSPP Female
Suits 1 suits an outside diameter (OD) of: 13.72mm
Side 2 threaded: 1/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Socket, Concentric, Coupling, Connector, Threaded, Screwed, Figure 240, Fittings.

(0)

£ 4.14

DN8 X 6 (1/4" X 1/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING HEX NIPPLE

Side 1 Thread: 1/4" BSPT Male x Male
Suits an outside diameter (OD) of: 13.72mm
Side 2 Thread: 1/8" BSPT Male x Male
Suits an outside diameter (OD) of: 10.29mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Reducing Heagon Nipple, Malleable, Iron, Threaded, Screwed, Figure 245, Fittings.

(0)

£ 2.94

DN8 X 6 (1/4" X 1/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 13.72mm
Side 2 threaded: 1/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

(0)

£ 2.16

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON SOLID PLUG

Threaded: 1/4" BSPT Male
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.

(0)

£ 1.86

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON SOCKET

Both sides threaded: 1/4" BSPP Female x Female
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Socket, Coupling, Connector, Straight, Threaded, Screwed, Figure 220, Fittings.

(0)

£ 1.59

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON ROUND CAP END

Threaded: 1/4" BSPP Female
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.

(0)

£ 1.53

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON MXF STREET UNION

Both sides threaded: 1/4" BSPT Male x BSPP Female
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Union, MXF, Street, Threaded, Screwed, Figure 341, Fittings.

(0)

£ 7.65

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON MXF STREET ELBOW 90°

Side One Thread: 1/4" BSPP Female
Side Two Thread: 1/4" BSPT Male
Both Sides Suit an Outside Diameter (OD) of: 13.72mm
Male x Female Elbow, Also known as a 'Street Elbow '
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, MXF, Male x Female Screwed, Figure 90 MF, Fittings.

(0)

£ 1.86

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 1/4" BSPP Female
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.

(0)

£ 2.85

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON MXF BEND 45°

Both sides threaded: 1/4" BSPP Female
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Street, MXF, MF, 45°, Bend, Figure 40, Screwed, Fittings.

(0)

£ 4.26

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Threaded: 1/4" BSPT Male
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.

(0)

£ 1.14

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON HEX NIPPLE

Both sides threaded: 1/4" BSPT Male x Male
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Screwed, Figure 280, Fittings.

(0)

£ 1.77

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON FXF UNION

Both sides threaded: 1/4" BSPP Female x Female
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Union, FXF, Threaded, Screwed, Figure 340, Fittings.

(0)

£ 8.70

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 1/4" BSPP Female
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.

(0)

£ 2.82

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON FXF ELBOW 90°

Both sides threaded: 1/4" BSPP Female
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 90, Screwed, Fittings.

(0)

£ 1.74

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON FXF ELBOW 45°

Both sides threaded: 1/4" BSPP Female x Female
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Compressed Air, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable 45°, 45 Degree, Malleable Iron, Threaded, Screwed, Figure 120, Fittings.

(0)

£ 4.77

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON EQUAL TEE

All sides threaded: 1/4" BSPP Female
Suits an outside diameter (OD) of: 13.2mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Screwed, Figure 130, Fittings.

(0)

£ 2.82

DN6 (1/8" NB) BSP GALVANISED MALLEABLE IRON SOCKET

Both sides threaded: 1/8" BSPP Female x Female
Suits an outside diameter (OD) of: 10.29mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Socket, Coupling, Connector, Straight, Threaded, Screwed, Figure 220, Fittings.

(0)

£ 2.82

DN6 (1/8" NB) BSP GALVANISED MALLEABLE IRON ROUND CAP END

Threaded: 1/8" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 185, Screwed, Fittings.

(0)

£ 6.24

DN6 (1/8" NB) BSP GALVANISED MALLEABLE IRON MXF STREET ELBOW 90°

Side One Thread: 1/8" BSPP Female
Side Two Thread: 1/8" BSPT Male
Both Sides Suit an Outside Diameter (OD) of: 10.29mm
Male x Female Elbow, Also known as a 'Street Elbow '
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, MXF, Male x Female Screwed, Figure 90 MF, Fittings.

(0)

£ 3.39

DN6 (1/8" NB) BSP GALVANISED MALLEABLE IRON HEX NIPPLE

Both sides threaded: 1/8" BSPT Male x Male
Suits an outside diameter (OD) of: 10.29mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Screwed, Figure 280, Fittings.

(0)

£ 3.75

DN6 (1/8" NB) BSP GALVANISED MALLEABLE IRON FXF ELBOW 90°

Both sides threaded: 1/8" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Figure 90, Screwed, Fittings.

(0)

£ 3.24

DN100 (4" NB) BSP BLACK MALLEABLE IRON M12 BOSSED MUNSEN PIPE RING

Suits pipe size: 4" NB
Suits an outside diameter (OD) of: 114.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Pipe Ring, Munsen Ring, Pipe Clip, Munson, Tube Clip, Screwed, Fittings.

(0)

£ 13.62

DN80 (3" NB) BSP BLACK MALLEABLE IRON M12 BOSSED MUNSEN PIPE RING

Suits pipe size: 3" NB
Suits an outside diameter (OD) of: 88.9mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Pipe Ring, Munsen Ring, Pipe Clip, Munson, Tube Clip, Screwed, Fittings.

(0)

£ 6.45

DN65 (2.1/2" NB) BSP BLACK MALLEABLE IRON M12 BOSSED MUNSEN PIPE RING

Suits pipe size: 2.1/2" NB
Suits an outside diameter (OD) of: 76.2mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Pipe Ring, Munsen Ring, Pipe Clip, Munson, Tube Clip, Screwed, Fittings.

(0)

£ 5.40

DN50 (2" NB) BSP BLACK MALLEABLE IRON M10 BOSSED MUNSEN PIPE RING

Suits pipe size: 2" NB
Suits an outside diameter (OD) of: 60.3mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Pipe Ring, Munsen Ring, Pipe Clip, Munson, Tube Clip, Screwed, Fittings.

(0)

£ 3.66

Account FORMS