Skip to Content
  1. Products
  2. Stainless Steel Pipework

Stainless Steel Pipework

A clean system-led route into the full hygienic and industrial stainless range.

Sort By Sort By: Featured
[SS-FAS-UBO-NB-500-M20-SS-316] DN500 (20" NB) HEAVY DUTY U-BOLT C.W NUTS SS 316 (A4)

DN500 (20" NB) HEAVY DUTY U-BOLT C.W NUTS SS 316 (A4)

Suits an inside diameter (OD) of: 5510mm
Material: Stainless Steel 316 (A4)
Thread: M20
Comes with 2x Nuts
(0)
£ 268.02
[SS-NB-FLA-150-RF-SO-TH-304] DN150 (6" NB) TABLE H SLIP ON PLATE FLANGE SS 304

DN150 (6" NB) TABLE H SLIP ON PLATE FLANGE SS 304

Flange inside diameter of: 168.5MM
Flange overall diameter: 304.8mm
PCD: 260.3
Bolt Holes: 12 off 22mm diameter
Flange Thickness: 28.6mm
Material: Stainless Steel
Grade: 304
Standards: EN1092-1
Flange Face: Raised Face
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Slip on Flange, Weld on, Stainless Steel, Steel, Raised Faced, RFSO

Part of our Flanges and Flanged Connections Range
(0)
[SS-MET-ECC-204X104X2.0-316] 204 X 104mm METRIC ECCENTRIC REDUCER 2mm THK SS 316

204 X 104mm METRIC ECCENTRIC REDUCER 2mm THK SS 316

To suit Metric
204mm x 104mm ECCENTRIC reducer
316SS
2mm THK
(0)
[SS-NB-CAP-S10-200-316S] DN200 (8" NB) SCHEDULE 10s SEAMLESS CAP END SS 316

DN200 (8" NB) SCHEDULE 10s SEAMLESS CAP END SS 316

Outside Diameter (OD): 219.1mm
Wall Thickness (WT): 3.76mm
Material: Stainless
Grade: 316
Standards: ANSI B16.9
Construction: Seamless

Applications:
Water, Oil & Gas / Petrochem, Steam, Fuels, Condensate, HVAC, Marine, Water & Waste Water, Mining, Construction, Power Generation (Energy), Waste to Energy (ERF)

Alternative terminology:
Cap, Blank, Stop end, Weld Cap
(0)
[SS-PIP-50-S10-316-SML-EU] DN50 (2" NB) SCHEDULE 10s STAINLESS SEAMLESS PIPE 316 (EUROPEAN)

DN50 (2" NB) SCHEDULE 10s STAINLESS SEAMLESS PIPE 316 (EUROPEAN)

Outside Diameter (OD): 60.3mm
Wall Thickness (WT): 2.77mm (Sch10)
Material: Stainless
Grade: 316
Standards: ASTM A312
Standard Length: 6 meters
Weight Per Meter: 3.99
Origin: European
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.

Part of our Stainless Pipes and Tubes Range
(0)
£ 215.91
[SS-BOX-80-80-3-304-MIL] 80 X 80 X 3MM STAINLESS STEEL BOX SECTION (MILL FINISH) GR. 304 Per Meter

80 X 80 X 3MM STAINLESS STEEL BOX SECTION (MILL FINISH) GR. 304

80 x 80mm Stainless Steel Box Section
Wall Thickness: 3mm
Material: Stainless Steel
Grade: 304
Finish: Mill Finish (As is) Descaled
Standard Length: 6 meter Random
Weight Per Meter: 6.97kg
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.
(0)
£ 55.86
[SS-BOX-50-50-3-304-MIL] 50 X 50 X 3MM STAINLESS STEEL BOX SECTION (MILL FINISH) GR. 304 Per Meter

50 X 50 X 3MM STAINLESS STEEL BOX SECTION (MILL FINISH) GR. 304

50 x 50mm Stainless Steel Box Section
Wall Thickness: 3mm
Material: Stainless Steel
Grade: 304
Finish: Mill Finish (As is) Descaled
Standard Length: 6 meter Random
Weight Per Meter: 4.47kg
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.
(0)
£ 37.14
[SS-NB-3K-TOL-BSPT-15-25] DN15 ON 25 (1/2" ON 3/4"-1" NB) BSPT 3000# THREAD-O-LET SS

DN15 ON 25 (1/2" ON 3/4"-1" NB) BSPT 3000# THREAD-O-LET SS

Threaded: 1/2" BSPT
Suits an outside diameter (OD) of: 21.3mm
Sits on an DN25 diameter for welding
Material: Stainless Steel
Construction: Forged
Certification Available: 3.1 BS EN 10204 Material Certification
(0)
[SS-NB-FLA-150-RF-SO-TF-304] DN150 (6" NB) TABLE F SLIP ON PLATE FLANGE SS 304

DN150 (6" NB) TABLE F SLIP ON PLATE FLANGE SS 304

Flange inside diameter of: 168.5MM
Flange overall diameter: 304.8mm
PCD: 260.4
Bolt Holes: 12 off 22mm diameter
Flange Thickness: 22.2mm
Material: Stainless Steel
Grade: 304
Standards: EN1092-1
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Slip on Flange, Weld on, Stainless Steel, Steel, Raised Faced, RFSO

Part of our Flanges and Flanged Connections Range
(0)
[SS-BOX-40-40-3-304-MIL] 40 X 40 X 3MM | BOX SECTION | STAINLESS STEEL | MILL FINISH | GR. 304 Per Meter

40 X 40 X 3MM | BOX SECTION | STAINLESS STEEL | MILL FINISH | GR. 304

40 x 40mm Stainless Steel Box Section
Wall Thickness: 3mm
Material: Stainless Steel
Grade: 304
Finish: Mill Finish (As is) Descaled
Standard Length: 6 meter Random
Weight Per Meter: 3.33kg
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.
(0)
£ 29.79
[SS-FAS-OBR-NB-LIN-15-304] 1/2" NB (20-25MM) RUBBER LINED BOSSED PIPE RING M10/M8 316SS

1/2" NB (20-25MM) RUBBER LINED BOSSED PIPE RING M10/M8 316SS

RUBBER LINED DUAL BOSSED PIPE RING
TO SUIT 1/2" PIPE
RANGE: 20-25MM
M8/M10 DUAL BOSS
RUBBER LINED EPDM
MADE FROM 20X2MM
(0)
£ 3.30
[SS-FAS-OBR-NB-LIN-10-304] 3/8" NB (15-19MM) RUBBER LINED BOSSED PIPE RING M10/M8 316SS

3/8" NB (15-19MM) RUBBER LINED BOSSED PIPE RING M10/M8 316SS

RUBBER LINED DUAL BOSSED PIPE RING
TO SUIT 3/8" PIPE
RANGE: 15-19MM
M8/M10 DUAL BOSS
RUBBER LINED EPDM
MADE FROM 20X2MM
(0)
£ 3.12
[SS-FAS-OBR-NB-LIN-20-304] 3/4" NB (26-30MM) RUBBER LINED BOSSED PIPE RING M10/M8 316SS

3/4" NB (26-30MM) RUBBER LINED BOSSED PIPE RING M10/M8 316SS

RUBBER LINED DUAL BOSSED PIPE RING
TO SUIT 3/4" PIPE
RANGE: 26-30MM
M8/M10 DUAL BOSS
RUBBER LINED EPDM
MADE FROM 20X2MM
(0)
£ 3.54
[SS-FAS-OBR-NB-LIN-25-304] 1" NB (32-36MM) RUBBER LINED BOSSED PIPE RING M10/M8 316SS

1" NB (32-36MM) RUBBER LINED BOSSED PIPE RING M10/M8 316SS

RUBBER LINED DUAL BOSSED PIPE RING
TO SUIT 1" PIPE
RANGE: 32-36MM
M8/M10 DUAL BOSS
RUBBER LINED EPDM
MADE FROM 20X2MM
(0)
£ 3.72
[SS-FAS-OBR-NB-LIN-32-304] 1.1/4" NB (38-43MM) RUBBER LINED BOSSED PIPE RING M10/M8 316SS

1.1/4" NB (38-43MM) RUBBER LINED BOSSED PIPE RING M10/M8 316SS

RUBBER LINED DUAL BOSSED PIPE RING
TO SUIT 1.1/4" PIPE
RANGE: 38-43MM
M8/M10 DUAL BOSS
RUBBER LINED EPDM
MADE FROM 20X2MM
(0)
£ 3.81
[SS-FAS-OBR-NB-LIN-68-72-304] 68-72MM RUBBER LINED BOSSED PIPE RING M10/M8 316SS

68-72MM RUBBER LINED BOSSED PIPE RING M10/M8 316SS

RUBBER LINED DUAL BOSSED PIPE RING
RANGE: 68-72MM
M8/M10 DUAL BOSS
RUBBER LINED EPDM
MADE FROM 20X2MM
(0)
£ 27.51
[SS-BOX-30-30-3-304-MIL] 30 X 30 X 3MM | BOX SECTION | STAINLESS STEEL | MILL FINISH | GR. 304 Per Meter

30 X 30 X 3MM | BOX SECTION | STAINLESS STEEL | MILL FINISH | GR. 304

30 x 30mm Stainless Steel Box Section
Wall Thickness: 3mm
Material: Stainless Steel
Grade: 304
Finish: Mill Finish (As is) Descaled
Standard Length: 6 meter Random
Weight Per Meter: 2.54kg
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.
(0)
[SS-FAS-OBR-NB-LIN-81-86-304] 81-86MM RUBBER LINED BOSSED PIPE RING M10/M8 316SS

81-86MM RUBBER LINED BOSSED PIPE RING M10/M8 316SS

RUBBER LINED DUAL BOSSED PIPE RING
RANGE: 81-86MM
M8/M10 DUAL BOSS
RUBBER LINED EPDM
MADE FROM 20X2MM
(0)
£ 30.93
[SS-FAS-OBR-NB-LIN-87-92-304] 87-92MM RUBBER LINED BOSSED PIPE RING M10/M8 316SS

87-92MM RUBBER LINED BOSSED PIPE RING M10/M8 316SS

RUBBER LINED DUAL BOSSED PIPE RING
RANGE: 87-92MM
M8/M10 DUAL BOSS
RUBBER LINED EPDM
MADE FROM 20X2MM
(0)
£ 31.50
[SS-FAS-OBR-NB-LIN-99-105-304] 99-105MM RUBBER LINED BOSSED PIPE RING M10/M8 316SS

99-105MM RUBBER LINED BOSSED PIPE RING M10/M8 316SS

RUBBER LINED DUAL BOSSED PIPE RING
RANGE: 99-105MM
M8/M10 DUAL BOSS
RUBBER LINED EPDM
MADE FROM 20X2MM
(0)
£ 47.04
[SS-FAS-OBR-NB-LIN-113-118-304] 113-118MM RUBBER LINED BOSSED PIPE RING M10/M8 316SS

113-118MM RUBBER LINED BOSSED PIPE RING M10/M8 316SS

RUBBER LINED DUAL BOSSED PIPE RING
RANGE: 113-118MM
M8/M10 DUAL BOSS
RUBBER LINED EPDM
MADE FROM 20X2MM
(0)
£ 49.89
[SS-FAS-OBR-NB-LIN-138-142-304] 138-142MM RUBBER LINED BOSSED PIPE RING M10/M8 316SS

138-142MM RUBBER LINED BOSSED PIPE RING M10/M8 316SS

RUBBER LINED DUAL BOSSED PIPE RING
RANGE: 138-142MM
M8/M10 DUAL BOSS
RUBBER LINED EPDM
MADE FROM 20X2MM
(0)
£ 60.63
[SS-NB-FLA-15-RF-SCR-BSPT-ASA150-316] DN15 (1/2" NB) ASA150 1/2" BSPT THREADED FLANGE SS 316/L

DN15 (1/2" NB) ASA150 1/2" BSPT THREADED FLANGE SS 316/L

Outside diameter (O): 88.9mm
PCD: 60.3
Number of bolt holes: 4 X M12
Material: STAINLESS 316
Rating: ASA 150
Threaded: BSPT
Type: Screwed

Standards: ASME B16.5
Flange Face: Raised Face
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Threaded Flange, Screwed Flange, ASA150, NPT, Carbon Steel, Raised Faced

Part of our Flanges and Flanged Connections Range
(0)
£ 9.27
[SS-FLAT-65-10-304] 65 X 10MM STAINLESS STEEL FLAT BAR GR. 304

65 X 10MM STAINLESS STEEL FLAT BAR GR. 304

65mm Wide Mild Steel Flat Bar
Thickness: 10mm
Material: Stainless Steel
Grade: 304
Finish: Mill Finish
Length: 4 meters

(0)
£ 58.50
[SS-HYG-TRI-HDC-129-316] 5.00" METRIC (DN125) HEAVY DUTY TRI CLAMP SS 316/L (TRI-CLAMP PART 2 OF 3)

5.00" METRIC (DN125) HEAVY DUTY TRI CLAMP SS 316/L (TRI-CLAMP PART 2 OF 3)

Stainless 304
Heavy Duty Construction
Hygienic BS4825
Part 2 of 3 of the Tri Clamp Union
(0)
£ 87.87
[SS-NB-FLA-80-FF-SO-BS-E-316] DN80 (3" NB) BS10 TABLE E FF SLIP ON PLATE FLANGE SS 316

DN80 (3" NB) BS10 TABLE E FF SLIP ON PLATE FLANGE SS 316

Suits an outside diameter (OD) of: 88.9mm
Material: Stainless Steel
Grade: 316
Standards: BS10 Table E
Flange Face: Flat
Bolt Holes: 4 off to suit M16 Bolts
PCD: 146.05mm
Flange Diameter: 184.15mm
Flange Thickness: 11.11mm
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative Terminology:
Slip on, Weld on, Plate Flange, FFSO, Stainless Steel, Steel

Part of our Flanges and Flanged Connections Range
(0)
[SS-NB-BW-CON-100x80-S10-WEL-316] DN100 X DN80 (4" X 3" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 316

DN100 X DN80 (4" X 3" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 316

Outside Diameter (OD): 114 X 89mm
Wall Thickness: 3.05 X 3.05mm
Length: 127mm
(0)
[SS-NB-BW-CON-100x50-S10-WEL-316] DN100 X DN50 (4" X 2" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 316

DN100 X DN50 (4" X 2" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 316

Outside Diameter (OD): 114 X 60.3mm
Wall Thickness: 2.77 X 3.05mm
Length: 101.6mm
(0)
[SS-NB-BW-ECC-100x65-S10-WEL-316] DN100 X DN65 (4" X 2½" NB) SCHEDULE 10S A403 WELDED ECCENTRIC REDUCER SS 316

DN100 X DN65 (4" X 2½" NB) SCHEDULE 10S A403 WELDED ECCENTRIC REDUCER SS 316

Outside Diameter (OD): 114 X 73mm
Wall Thickness: 3.05 X 3.05mm
Length: 101.6mm
(0)
[SS-MET-FLA-FF-SO-P16-150-63.5-D-316] DN150 (6" NB) PN16 BORED 63.5mm MET. (D THK) FF SLIP ON FLANGE SS 316

DN150 (6" NB) PN16 BORED 63.5mm MET. (D THK) FF SLIP ON FLANGE SS 316

Suits an outside diameter (OD) of: 154mm
Material: Stainless
Grade: 316
Standards: EN1092-1
Bored to suit 2.1/2" Dairy (63.5mm)

Alternative terminology:
FF, SO, Flat Face Flange, Slip on flange, Weld on Flange, Dairy Flange, Hygienic Flange, Sanitary Flange, Reduced Thick Flange. OD Flange.

Part of our Flanges and Flanged Connections Range
(0)
[SS-PIP-15-S160-316-SML] DN15 (1/2" NB) SCHEDULE 160s STAINLESS SEAMLESS PIPE 316

DN15 (1/2" NB) SCHEDULE 160s STAINLESS SEAMLESS PIPE 316

Outside Diameter (OD): 21.3mm
Wall Thickness (WT): 4.78mm
Material: Stainless
Grade: 316/L
Standards: ASTM A312
Standard Length: 6 meter Random
Weight Per Meter: 1.95kg
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.

Part of our Stainless Pipes and Tubes Range
(0)
£ 46.95
[SS-HYG-AV-M10-NB-80-304] 3.00" NB | HYGIENIC | M10 BOSSED | ANTI VIBRATION | BLUE RUBBER LINED | PIPE CLIP | STAINLESS STEEL | GR. 304/L

3.00" NB | HYGIENIC | M10 BOSSED | ANTI VIBRATION | BLUE RUBBER LINED | PIPE CLIP | STAINLESS STEEL | GR. 304/L

Best suited fora 88.9mm outside diameter
Clamp Material: Stainless 304
M10 Bossed Connection
Insert Material: Blue Lined Rubber

Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Clip, Clamp, Support, Bracket, Anti Vibration
(0)
£ 13.35
[SS-BOX-150-150-10-304-MIL] 150 X 150 X 10MM STAINLESS STEEL (MILL FINISH) BOX SECTION GR. 304 Per Meter

150 X 150 X 10MM STAINLESS STEEL (MILL FINISH) BOX SECTION GR. 304

150 x 150mm Stainless Steel Box Section
Wall Thickness: 10mm
Material: Stainless Steel
Grade: 304
Finish: Mill Finish (As is) Descaled
Standard Length: 6 meter Random
Weight Per Meter: 44.00kg
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.
(0)
[SS-BOX-25-25-3-DPOL-304] 25 X 25 X 3MM | BOX SECTION | STAINLESS STEEL | DULL POLISHED | GR. 304 Per Meter

25 X 25 X 3MM | BOX SECTION | STAINLESS STEEL | DULL POLISHED | GR. 304

25 x 25mm Stainless Steel Box Section
Wall Thickness: 3mm
Material: Stainless Steel
Grade: 304
Finish: Dull Polished (180 Grit Minimum)
Standard Length: 6 meter Random
Weight Per Meter: 1.42kg
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.
(0)
[SS-MET-AV-PLN-DN80-304] DN80 OD PLAIN WELD STEM HYGIENIC AV CLIPS SS 304

DN80 OD PLAIN WELD STEM HYGIENIC AV CLIPS SS 304

Best suited for 85mm outside diameter
Clamp Material: Stainless 304
Plain Weld End Connection
Insert Material: Blue Rubber

Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Clip, Clamp, Support, Bracket, Anti Vibration
(0)
£ 12.27
[SS-HYG-PIP-88.9-2-304] 3.1/2" (88.9MM OD) X 2MM WALL PIPE, 304 SS

3.1/2" (88.9MM OD) X 2MM WALL PIPE, 304 SS

Outside diameter: 31/2" (88.9mm)
Wall Thickness: 2mm
Material: Stainless
Grade: 304
Standards: Imperial Inch OD EN10357
Standard Length: 6 meters
(0)
£ 42.60
[SS-HYG-TRI-FER-FEM-50.8-316] 2.00" OD CLAMP UNION ADAPTOR FEMALE BSP X FERRULE SS 316

2.00" OD CLAMP UNION ADAPTOR FEMALE BSP X FERRULE SS 316

Side 1: 2" OD Hygienic Universal Clamp Union
Side 2: 2" NB BSP Female Thread (60.3mm)
Material: Stainless 316


Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.
(0)
£ 41.49
[SS-HYG-TRI-FER-MAL-50.8-316] 2.00" OD CLAMP UNION ADAPTOR MALE BSP X FERRULE SS 316

2.00" OD CLAMP UNION ADAPTOR MALE BSP X FERRULE SS 316

Side 1: 2" OD Hygienic Universal Clamp Union
Side 2: 2" NB BSP Male Thread (60.3mm)
Material: Stainless 316


Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.
(0)
£ 41.49
[SS-HYG-TRI-SEA-38.1-SIL] 1.50" OD CLAMP UNION WHITE SILICONE UN-LIPPED O RING (CLAMP PART 3 OF 3)

1.50" OD CLAMP UNION WHITE SILICONE UN-LIPPED O RING (CLAMP PART 3 OF 3)

Suits a 1.1/2" Universal Clamp Union
Material: Silicone
Colour: White (Clear)
Universal Clamp Union: Part 4 of 4

Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Seals, O Rings, Gasket, O-Ring
(0)
£ 3.45
[SS-HYG-PIP-DN-50-2-304] DN50 | 2.0MM WALL | DIN11850 | POLISHED | HYGIENIC | DAIRY PIPE | STAINLESS STEEL | GR. 304L

DN50 | 2.0MM WALL | DIN11850 | POLISHED | HYGIENIC | DAIRY PIPE | STAINLESS STEEL | GR. 304L

Outside diameter: 53mm
Wall Thickness: 2mm
Material: Stainless
Grade: 304
Finish: Dull Polish 180 to 220 grit (Internal Ra less than 0.8µm)
Standards: Imperial Inch OD EN10357
Standard Length: 6 meters
Weight Per Meter: 1.93kg
Construction: Welded

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.

Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Tube, Pipe, Length


Part of our Stainless Pipes and Tubes Range
(0)
£ 24.90
[SS-HYG-PIP-DN-40-1.5-304] DN40 | 1.5MM WALL | DIN11850 | POLISHED | HYGIENIC | DAIRY PIPE | STAINLESS STEEL | GR. 304/L

DN40 | 1.5MM WALL | DIN11850 | POLISHED | HYGIENIC | DAIRY PIPE | STAINLESS STEEL | GR. 304/L

Outside diameter: 41mm
Wall Thickness: 1.5mm
Material: Stainless
Grade: 304
Finish: Dull Polish 180 to 220 grit (Internal Ra less than 0.8µm)
Standards: Imperial Inch OD EN10357
Standard Length: 6 meters
Weight Per Meter: 1.5kg
Construction: Welded

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.

Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Tube, Pipe, Length


Part of our Stainless Pipes and Tubes Range
(0)
[SS-HYG-CON-154X84X2.0-304] 154mm x 84mm OD CONCENTRIC REDUCER DESCALED 2mm THK SS 304

154mm x 84mm OD CONCENTRIC REDUCER DESCALED 2mm THK SS 304

Side One Suits an outside diameter (OD) of: 154mm
Side Two Suits an outside diameter (OD) of: 84mm
Wall thickness (WT): 2mm
Material: Stainless
Grade: 304
Construction: Welded
Finish: Descaled Internally & Externally

Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Conred, Con Red, Reducing Cone, 154mm x 104mm
(0)
£ 67.86
[SS-MET-CON-84X44X2-304] 84 x 44mm METRIC CONCENTRIC REDUCER 2mm THK SS 304

84 x 44mm METRIC CONCENTRIC REDUCER 2mm THK SS 304

Side One Suits an outside diameter (OD) of: 84mm
Side Two Suits an outside diameter (OD) of: 44mm
Wall thickness (WT): 2mm
Material: Stainless
Grade: 304
Construction: Welded
Finish:

Applications:
Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Metric Conred, Con Red, Reducing Cone,
(0)
£ 34.38
[SS-MET-CON-84X54X2-304] 84 x 54mm METRIC CONCENTRIC REDUCER 2mm THK SS 304

84 x 54mm METRIC CONCENTRIC REDUCER 2mm THK SS 304

Side One Suits an outside diameter (OD) of: 84mm
Side Two Suits an outside diameter (OD) of: 54mm
Wall thickness (WT): 2mm
Material: Stainless
Grade: 304
Construction: Welded
Finish:

Applications:
Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Metric Conred, Con Red, Reducing Cone,
(0)
£ 23.10
[SS-MET-PET-84X2.0-304] DN80 (84MM) OD HYGIENIC PULLED EQUAL TEE DESCALED 2.0mm THK SS 304

DN80 (84MM) OD HYGIENIC PULLED EQUAL TEE DESCALED 2.0mm THK SS 304

Outside Diameter (OD): 84mm
Wall Thickness (WT): 2mm
Material: Stainless
Grade: 304
Construction: Welded
Finish: Descaled Internally & Externally

Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Pulled Equal Tee, Equal Tee
(0)
£ 52.77
[SS-MET-BEN-90-1.5D-254X2.0-316] 254mm OD METRIC BEND 90° (R=1.5D) 2mm THK SS 316

254mm OD METRIC BEND 90° (R=1.5D) 2mm THK SS 316

Outside diameter (OD) of: 254mm
Wall Thickness (WT): 3mm
Material: Stainless
Grade: 316
Standards: EN10253
Radius: 1.5D
Angle: 90 Degree
Construction: Welded
Finish: Mill Finish (Non-polished)
(0)
[SS-MET-CON-254X204X2.0-316] 254 X 204mm METRIC CONCENTRIC REDUCER 2mm THK SS 316/L

254 X 204mm METRIC CONCENTRIC REDUCER 2mm THK SS 316/L

Side One Suits an outside diameter (OD) of: 254mm
Side Two Suits an outside diameter (OD) of: 204mm
Wall thickness (WT): 2mm
Material: Stainless
Grade: 316
Construction: Welded
Finish: Mill

Alternative terminology:
Metric Conred, Con Red, Reducing Cone,
(0)
£ 108.06
[SS-MET-CON-254X154X2.0-316] 254 X 154mm METRIC CONCENTRIC REDUCER 2mm THK SS 316

254 X 154mm METRIC CONCENTRIC REDUCER 2mm THK SS 316

Side One Suits an outside diameter (OD) of: 254mm
Side Two Suits an outside diameter (OD) of: 154mm
Wall thickness (WT): 2mm
Material: Stainless
Grade: 316
Construction: Welded
Finish: Mill

Alternative terminology:
Metric Conred, Con Red, Reducing Cone,
(0)
[SS-MET-PET-104X2.0-316] 104mm OD METRIC PULLED EQUAL TEE 2mm THK SS 316

104mm OD METRIC PULLED EQUAL TEE 2mm THK SS 316

Outside Diameter (OD): 104mm
Wall Thickness (WT): 2mm
Material: Stainless
Grade: 316
Standards: EN 10217-7, ISO 1127.
Construction: Welded
Certification Available: 3.1 BS EN 10204 Material Certification
(0)
[SS-HYG-BEN-90-1.5D-DN40X1.5-316] DN 40 (40mm OD) HYGIENIC BEND 90° (R=1.5D) POLISHED 1.5mm THK SS 316

DN 40 (40mm OD) HYGIENIC BEND 90° (R=1.5D) POLISHED 1.5mm THK SS 316

Outside Diameter (OD): 40mm
Wall Thickness (WT): 1.5mm
Material: Stainless
Grade: 316
Angle: 90 Degree
Construction: Welded

Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Elbows
(0)
[SS-HYG-BEN-90-1.5D-DN32X1.5-316] DN 32 (34mm OD) HYGIENIC BEND 90° (R=1.5D) POLISHED 1.5mm THK SS 316

DN 32 (34mm OD) HYGIENIC BEND 90° (R=1.5D) POLISHED 1.5mm THK SS 316

Outside Diameter (OD): 34mm
Wall Thickness (WT): 1.5mm
Material: Stainless
Grade: 316
Angle: 90 Degree
Construction: Welded

Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Elbows
(0)
[SS-HYG-FLA-RF-SO-P16-32-34-E-316] 1.25" (DN32) PN16 (BORED 34mm METRIC) RF SLIP ON FLANGE SS 316

1.25" (DN32) PN16 (BORED 34mm METRIC) RF SLIP ON FLANGE SS 316

Suits an outside diameter (OD) of: 34mm
Material: Stainless
Grade: 316
Standards: EN1092-1
Flange Face: Raised Face
Bolt Holes: 4 off to suit M16 Bolts
PCD:
Flange Diameter:
Flange Thickness: Full thick PN16
Inside diameter to suit 34MM METRIC Hygienic / Dairy

Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
RF, SO, Raised Face Flange, Slip on flange, Weld on Flange, Dairy Flange, Hygienic Flange, Sanitary Flange, Reduced Thick Flange. OD Flange.

Part of our Flanges and Flanged Connections Range
(0)
[SS-MET-PRT-104X54X2.0-316] 104 X 54mm OD METRIC PULLED REDUCING TEE 2mm THK SS 316

104 X 54mm OD METRIC PULLED REDUCING TEE 2mm THK SS 316

Run outside Diameter (OD): 104mm
Branch outside Diameter (OD): 54mm
Wall Thickness (WT): 2mm
Material: Stainless
Grade: 316
Standards: ANSI B16.9
Construction: Welded
Finish:

Applications:
Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Metric True Bore Reducing Branch Tee, 4" x 2.1/2"
(0)
£ 104.46
[SS-MET-CON-DN50XDN40X1.5-316] DN50 (53mm) x DN40 (44mm) METRIC CONCENTRIC REDUCER 1.5MM THK 316SS

DN50 (53mm) x DN40 (44mm) METRIC CONCENTRIC REDUCER 1.5MM THK 316SS

DN50 (53mm) x DN40 (44mm)
METRIC CONCENTRIC REDUCER
1.5MM THK
316SS
DIN11852
(0)
£ 14.67
[SS-HYG-PET-DN32X1.5-316] DN32 (34mm OD) METRIC PULLED EQUAL TEE POLISHED 1.5mm THK SS 316

DN32 (34mm OD) METRIC PULLED EQUAL TEE POLISHED 1.5mm THK SS 316

Outside Diameter (OD): 34mm
Wall Thickness (WT): 1.5mm
Material: Stainless
Grade: 316
Construction: Welded
Finish: Dull Polished Externally, Descaled Internally

Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Pulled Equal Tee, Equal Tee
(0)
£ 28.26
[SS-RSA-100-100-6-304] 100 X 100 X 6MM STAINLESS STEEL ANGLE, 304L

100 X 100 X 6MM STAINLESS STEEL ANGLE, 304L

10mm x 100mm Equal Angle
Thickness: 6mm
Material: Stainless Steel
Grade: 304L
(0)
£ 111.69
[SS-RSA-100-100-6-316] 100 X 100 X 6MM STAINLESS STEEL ANGLE, 316/L

100 X 100 X 6MM STAINLESS STEEL ANGLE, 316/L

10mm x 100mm Equal Angle
Thickness: 6mm
Material: Stainless Steel
Grade: 316L
(0)
£ 164.58
[SS-BOX-100-100-3-DPOL-316] 100 X 100 X 3MM STAINLESS STEEL BOX SECTION DULL POLISHED GR. 316 Per Meter

100 X 100 X 3MM STAINLESS STEEL BOX SECTION DULL POLISHED GR. 316

100 x 100mm Stainless Steel Box Section
Wall Thickness: 3mm
Material: Stainless Steel
Grade: 316
Finish: Dull Polished (180 Grit Minimum)
Standard Length: 6 meter Random
Weight Per Meter: 6.97kg
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.
(0)
£ 75.57
[SS-BOX-50-50-3-DPOL-316] 50 X 50 X 3MM STAINLESS STEEL BOX SECTION DULL POLISHED GR. 316 Per Meter

50 X 50 X 3MM STAINLESS STEEL BOX SECTION DULL POLISHED GR. 316

50 x 50mm Stainless Steel Box Section
Wall Thickness: 3mm
Material: Stainless Steel
Grade: 316
Finish: Dull Polished (180 Grit Minimum)
Standard Length: 6 meter Random
Weight Per Meter: 4.55kg
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.
(0)
£ 23.40
[SS-HYD-PIP-30-2.0-316] 30mm OD X 2.0mm WALL HYDRAULIC PIPE 316 SS

30mm OD X 2.0mm WALL HYDRAULIC PIPE 316 SS

Outside Diameter (OD): 30mm
Wall Thickness (WT): 2.0mm
Material: Stainless
Grade: 316
Standards: ASTM A269
Standard Length: 6 meter Random
Weight Per Meter: 1.4kg
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.

Part of our Stainless Pipes and Tubes Range
(0)
£ 42.03
[SS-PIP-300-S10-304-SML] DN300 (12" NB) SCHEDULE 10s STAINLESS SEAMLESS PIPE 304/L

DN300 (12" NB) SCHEDULE 10s STAINLESS SEAMLESS PIPE 304/L

Outside Diameter (OD): 323.8mm
Wall Thickness (WT): 4.55mm (Sch10)
Material: Stainless
Grade: 304
Standards: ASTM A312
Random Length: 5.8 to 7.5 meter Random
Weight Per Meter: 28.2kg
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.

Part of our Stainless Pipes and Tubes Range
(0)
£ 302.64
[SS-NB-BW-TEE-EQ-300-S10-304-WEL] DN300 (12" NB) SCHEDULE 10s WELDED EQUAL TEE 90° SS 304

DN300 (12" NB) SCHEDULE 10s WELDED EQUAL TEE 90° SS 304

Outside Diameter (OD): 323.9mm
Wall Thickness (WT): 10.30mm
Material: Stainless
Grade: 304
Standards: ANSI B16.9
Construction: Welded
Certification Available: 3.1 BS EN 10204 Material Certification
(0)
[SS-NB-BW-TEE-EQ-300-S10-304-SML] DN300 (12" NB) SCHEDULE 10s SEAMLESS EQUAL TEE 90° SS 304/L

DN300 (12" NB) SCHEDULE 10s SEAMLESS EQUAL TEE 90° SS 304/L

Outside Diameter (OD): 323.9mm
Wall Thickness (WT): 10.30mm
Material: Stainless
Grade: 304
Standards: ANSI B16.9
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification
(0)
[SS-NB-BW-TEE-EQ-250-S10-304-SML] DN250 (10" NB) SCHEDULE 10S A403 SEAMLESS EQUAL TEE SS 304/L

DN250 (10" NB) SCHEDULE 10S A403 SEAMLESS EQUAL TEE SS 304/L

Outside Diameter (OD): 273.9mm
Wall Thickness: 9.27mm
Centre to End: 216.0mm
Schedule: 10S
Weight: 4.19kg
Material: Stainless Steel
Material Grade: 304
Construction: Seamless

Certification Available: 3.1 BS EN 10204 Material Certification

Alternative Terminology: Buttweld Tee, Equal Tee, LR, Welding Tee, Weldable
(0)
£ 714.18
[SS-NB-BW-ELB-90-300-S10-304-SML] DN300 (12" NB) SCHEDULE 10s SEAMLESS ELBOW 90° SS 304/L

DN300 (12" NB) SCHEDULE 10s SEAMLESS ELBOW 90° SS 304/L

Outside Diameter (OD): 323.8mm
Wall Thickness (WT): 4.57mm (Sch10)
Material: Stainless
Grade: 304
Standards: ANSI B16.9
Radius: Long 1.5D
Angle: 90 Degree
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification
(0)
£ 468.00
[SS-NB-BW-CON-300x200-S10-304-SML] DN300 X DN200 (12" X 8" NB) SCHEDULE 10S A403 SEAMLESS CONCENTRIC REDUCER SS 304/L

DN300 X DN200 (12" X 8" NB) SCHEDULE 10S A403 SEAMLESS CONCENTRIC REDUCER SS 304/L

Outside Diameter (OD): 323.9 X 218mm
Wall Thickness: 4.57 X 3.76mm
Length: 203.2mm
(0)
£ 196.08
[SS-NB-BW-CON-300x250-S10-304-SML] DN300 X DN250 (12" X 10" NB) SCHEDULE 10S A403 SEAMLESS CONCENTRIC REDUCER SS 304/L

DN300 X DN250 (12" X 10" NB) SCHEDULE 10S A403 SEAMLESS CONCENTRIC REDUCER SS 304/L

Outside Diameter (OD): 323.9 X 273mm
Wall Thickness: 4.57 X 4.19mm
Length: 203.2mm
(0)
£ 196.08
[SS-NB-BW-CON-250x200-S10-304-SML] DN300 X DN250 (12" X 8" NB) SCHEDULE 10S A403 SEAMLESS CONCENTRIC REDUCER SS 304/L

DN300 X DN250 (12" X 8" NB) SCHEDULE 10S A403 SEAMLESS CONCENTRIC REDUCER SS 304/L

Outside Diameter (OD): 273 X 219mm
Wall Thickness: 4.19 X 3.76mm
Length: 178mm
(0)
£ 196.08
[SS-NB-BW-CON-150x125-S10-304-SML] DN150 X DN125 (6" X 5" NB) SCHEDULE 10S A403 SEAMLESS CONCENTRIC REDUCER SS 304/L

DN150 X DN125 (6" X 5" NB) SCHEDULE 10S A403 SEAMLESS CONCENTRIC REDUCER SS 304/L

Outside Diameter (OD): 168.3 X 141.3mm
Wall Thickness: 3.40 X 3.40mm
Length: 139.7mm
(0)
£ 196.08
[SS-NB-BW-CON-150x80-S10-304-SML] DN150 X DN80 (6" X 3" NB) SCHEDULE 10S A403 SEAMLESS CONCENTRIC REDUCER SS 304/L

DN150 X DN80 (6" X 3" NB) SCHEDULE 10S A403 SEAMLESS CONCENTRIC REDUCER SS 304/L

Outside Diameter (OD): 168.3 X 88.9mm
Wall Thickness: 3.40 X 3.05mm
Length: 139.7mm
(0)
£ 196.08
[SS-NB-BW-CON-200x150-S10-304-SML] DN200 X DN150 (8" X 6" NB) SCHEDULE 10S A403 SEAMLESS CONCENTRIC REDUCER SS 304/L

DN200 X DN150 (8" X 6" NB) SCHEDULE 10S A403 SEAMLESS CONCENTRIC REDUCER SS 304/L

Outside Diameter (OD): 219 X 168.3mm
Wall Thickness: 3.76 X 3.40mm
Length: 152mm
(0)
£ 196.08
[SS-BOX-150-150-3-DPOL-304] 150 X 150 X 3MM STAINLESS STEEL BOX SECTION DULL POLISHED GR. 304 Per Meter

150 X 150 X 3MM STAINLESS STEEL BOX SECTION DULL POLISHED GR. 304

150 x 150mm Stainless Steel Box Section
Wall Thickness: 3mm
Material: Stainless Steel
Grade: 304
Finish: Dull Polished (180 Grit Minimum)
Standard Length: 6 meter Random
Weight Per Meter: 20kg
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.
(0)
£ 309.21
[SS-HYD-ADPT-15-BSP-NPT-MXF-316] DN15 (1/2" NB) BSPT MALE X NPT FEMALE 6000 SERIES MXF ADAPTOR SS 316

DN15 (1/2" NB) BSPT MALE X NPT FEMALE 6000 SERIES MXF ADAPTOR SS 316

Side 1: 1/2" BSPT Male
Side 2: 1/2" NPT Female
Suits an outside diameter (OD) of: 21.3mm
Material: Stainless 316

Standards:
ASTM A182, ANSI B16.11/BS3799, Nominal Bore, Hydraulic, High Pressure, 6000 psi, Forged Stainless, Adaptor, High Pressure.

Alternative terminology:
Forged, Stainless, Adaptor, Straight, Equal, MF, MXF, Male x Female.
(0)
£ 31.02
[SS-HYD-ADPT-25-BSP-NPT-MXF-316] DN25 (1" NB) BSPT MALE X NPT FEMALE 6000 SERIES MXF ADAPTOR SS 316

DN25 (1" NB) BSPT MALE X NPT FEMALE 6000 SERIES MXF ADAPTOR SS 316

Side 1: 1" BSPT Male
Side 2: 1" NPT Female
Suits an outside diameter (OD) of: 33.4mm
Material: Stainless 316

Standards:
ASTM A182, ANSI B16.11/BS3799, Nominal Bore, Hydraulic, High Pressure, 6000 psi, Forged Stainless, Adaptor, High Pressure.

Alternative terminology:
Forged, Stainless, Adaptor, Straight, Equal, MF, MXF, Male x Female.
(0)
£ 75.30
[SS-DOW-SEAL-15-BSPP] DN15 (1/2" NB) BSPP STAINLESS STEEL 316 / NITRILE DOWTY SEAL / BONDED WASHER

DN15 (1/2" NB) BSPP STAINLESS STEEL 316 / NITRILE DOWTY SEAL / BONDED WASHER

Suits a 1/2" BSPP Male Hydraulic Thread
316 Stainless Steel Ring
Nitrile Rubber
Self Centering
(0)
£ 2.55
[SS-DOW-SEAL-25-BSPP] DN25 (1" NB) BSPP STAINLESS STEEL 316 / NITRILE DOWTY SEAL / BONDED WASHER

DN25 (1" NB) BSPP STAINLESS STEEL 316 / NITRILE DOWTY SEAL / BONDED WASHER

Suits a 1" BSPP Male Hydraulic Thread
316 Stainless Steel Ring
Nitrile Rubber
Self Centering
(0)
£ 3.39
[SS-NB-BW-TEE-EQ-300-S10-316-WEL] DN300 (12" NB) SCHEDULE 10S WELDED EQUAL TEE 90° SS 316/L

DN300 (12" NB) SCHEDULE 10S WELDED EQUAL TEE 90° SS 316/L

Outside Diameter (OD): 323.9mm
Wall Thickness (WT): 10.30mm
Material: Stainless
Grade: 316
Standards: ANSI B16.9
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification
(0)
[SS-BOX-70-70-5-DPOL-304] 70 X 70 X 5MM STAINLESS STEEL BOX SECTION DULL POLISHED GR. 304 Per Meter

70 X 70 X 5MM STAINLESS STEEL BOX SECTION DULL POLISHED GR. 304

70 x 70mm Stainless Steel Box Section
Wall Thickness: 5mm
Material: Stainless Steel
Grade: 304
Finish: Dull Polished (180 Grit Minimum)
Standard Length: 6 meter Random
Weight Per Meter: 6.8kg
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.
(0)
£ 60.69
[SS-PIP-MET-304-2-316] DN300 (304mm OD) X 2.0mm WALL STAINLESS STEEL PIPE 316/L

DN300 (304mm OD) X 2.0mm WALL STAINLESS STEEL PIPE 316/L

Outside diameter: 304mm
Wall Thickness: 2.0mm
Material: Stainless
Grade: 316
Standards: Imperial Inch OD EN10357
Standard Length: 6 meters
Weight Per Meter: 14.90kg
Construction: Welded

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.

Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Tube, Pipe, Length
(0)
£ 149.76
[SS-NB-BW-ELB-90-400-S10-316-WEL] DN400 (16" NB) SCHEDULE SCH10 LONG RADIUS 90 DEG ELBOW 316

DN400 (16" NB) SCHEDULE SCH10 LONG RADIUS 90 DEG ELBOW 316

Outside Diameter (OD): 406mm
Wall Thickness: 4.78mm
Centre to Face: 610mm
Schedule: S10
Weight: 51.6kg
Material: Stainless
(0)
£ 429.75
[SS-FLAT-200-6-304] 200 X 6MM STAINLESS STEEL FLAT BAR GR. 304

200 X 6MM STAINLESS STEEL FLAT BAR GR. 304

200mm Wide Mild Steel Flat Bar
Thickness: 6mm
Material: Stainless Steel
Grade: 304
Finish: Mill Finish
Length: 4 meters
(0)
£ 91.95
[SS-HYG-TRI-HDC-NB-168-304] 6.00" NB (DN150 6.5/8" / 168.1MM) HEAVY DUTY TRI CLAMP SS 304 (TRI-CLAMP PART 2 OF 3)

6.00" NB (DN150 6.5/8" / 168.1MM) HEAVY DUTY TRI CLAMP SS 304 (TRI-CLAMP PART 2 OF 3)

TO SUIT NB PIPE
Stainless 304
Heavy Duty Construction
Hygienic BS4825
Part 2 of 3 of the Tri Clamp Union
(0)
£ 158.46
[SS-HYG-TRI-SEA-168-EPD] 6" NB CLAMP UNION BLUE EPDM O RING (CLAMP PART 3 OF 3)

6" NB CLAMP UNION BLUE EPDM O RING (CLAMP PART 3 OF 3)

Suits a 6" NB Universal Clamp Union
Material: EPDM
Colour: Blue
Universal Clamp Union: Part 4 of 4

Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Seals, O Rings, Gasket, O-Ring
(0)
£ 17.61
[SS-NB-BW-CON-300x200-S10-316-WEL] DN300 X DN200 (12" X 8" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 316

DN300 X DN200 (12" X 8" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 316

Outside Diameter (OD): 323.9 X 218mm
Wall Thickness: 4.57 X 3.76mm
Length: 203.2mm
(0)
£ 196.08
[SS-NB-BW-CON-250x200-S10-316-WEL] DN300 X DN250 (12" X 8" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 316

DN300 X DN250 (12" X 8" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 316

Outside Diameter (OD): 273 X 219mm
Wall Thickness: 4.19 X 3.76mm
Length: 178mm
(0)
£ 196.08
[SS-NB-BW-CON-150x125-S10-316-WEL] DN150 X DN125 (6" X 5" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 316

DN150 X DN125 (6" X 5" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 316

Outside Diameter (OD): 168.3 X 141.3mm
Wall Thickness: 3.40 X 3.40mm
Length: 139.7mm
(0)
£ 196.08
[SS-NB-BW-CON-300x200-S10-304-WEL] DN300 X DN200 (12" X 8" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 304

DN300 X DN200 (12" X 8" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 304

Outside Diameter (OD): 323.9 X 218mm
Wall Thickness: 4.57 X 3.76mm
Length: 203.2mm
(0)
£ 196.08
[SS-NB-BW-CON-250x200-S10-304-WEL] DN250 X DN200 (10" X 8" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 304

DN250 X DN200 (10" X 8" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 304

Outside Diameter (OD): 273 X 219mm
Wall Thickness: 4.19 X 3.76mm
Length: 178mm
(0)
£ 196.08
[SS-NB-BW-CON-150x125-S10-304-WEL] DN150 X DN125 (6" X 5" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 304

DN150 X DN125 (6" X 5" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 304

Outside Diameter (OD): 168.3 X 141.3mm
Wall Thickness: 3.40 X 3.40mm
Length: 139.7mm
(0)
£ 196.08
[SS-BOX-150-150-3-304-MIL] 150 X 150 X 3MM STAINLESS STEEL BOX SECTION MILL FINISH GR. 304 Per Meter

150 X 150 X 3MM STAINLESS STEEL BOX SECTION MILL FINISH GR. 304

150 x 150mm Stainless Steel Box Section
Wall Thickness: 3mm
Material: Stainless Steel
Grade: 304
Finish: Dull Polished (180 Grit Minimum)
Standard Length: 6 meter Random
Weight Per Meter: 20kg
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.
(0)
£ 126.54
[SS-PIP-ISO-114.3-1.50-304-WEL] 114.3mm OD x 1.50mm WALL STAINLESS ISO WELDED PIPE 304/L

114.3mm OD x 1.50mm WALL STAINLESS ISO WELDED PIPE 304/L

Outside diameter: 114.3mm
Wall Thickness: 1.50mm
Material: Stainless
Grade: 304/L
Finish: Mill Finish (Descaled / Non-Polished)
Standards: EN/ISO 1127 / EN10217-1
Standard Length: 6 meters
Weight Per Meter: 5.42kg
Construction: Welded
(0)
£ 57.15
[SS-NB-FLA-65-RF-WN-S10-P16-316] DN65 (2.1/2" NB) SCHEDULE 10S PN16 WELD NECK FLANGE SS 316

DN65 (2.1/2" NB) SCHEDULE 10S PN16 WELD NECK FLANGE SS 316

Outside diameter (O): 185mm
Flange thickness (C): 18mm
Neck height (A): 45mm
Pitch circle diameter (K): 145mm
Number of bolt holes: 4
Material: 316 Stainless Steel
Rating: PN16
Type: Weld Neck Flange (ASME B16.5)

Standards: ASME B16.5
Flange Face: Raised Face
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
WN Flange, Welding Neck, ASA150, Stainless Steel, RF

Part of our Flanges and Flanged Connections Range
(0)
£ 68.34
[SS-NB-BW-CON-65x50-S10-WEL-316] DN65 X DN50 (2½" X 2" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 316

DN65 X DN50 (2½" X 2" NB) SCHEDULE 10S A403 WELDED CONCENTRIC REDUCER SS 316

Outside Diameter (OD): 73 X 60mm
Wall Thickness: 3.05 X 2.77mm
Length: 89mm
(0)
£ 28.29
[SS-MET-BRN-154-P16-304] DN150 (6" NB) PN16 CHAMF. FF BACKING RING BORED TO SUIT 154mm COLLAR 12mm THK SS 304/L

DN150 (6" NB) PN16 CHAMF. FF BACKING RING BORED TO SUIT 154mm COLLAR 12mm THK SS 304/L

Suits an outside diameter (OD) of: 154mm
Material: Stainless Steel
Grade: 304
Standards: EN1092-1
Flange Face: Flat
Bolt Holes: 8 off to suit M20 Bolts
PCD: 240mm
Flange Diameter: 285mm
Flange Thickness: 17.5mm

Chamfered inner edge for use with metric collar / taft end.
(0)
£ 45.69
[SS-HD-HNG-TUB] HEAVY DUTY STAINLESS STEEL (SATIN) SPRUNG GATE HINGE FOR TUBE 316/L

HEAVY DUTY STAINLESS STEEL (SATIN) SPRUNG GATE HINGE FOR TUBE 316/L

Self-Closing Gate Hinge for Round Tube – Complete Set
Supplied as a complete assembly with all required components and fitting details.
Designed to provide a maximum opening range of 180°.

For installation, position the gate in the fully closed position, then tension the hinge by turning the adjustment bolt half a turn clockwise or anti-clockwise, depending on the required closing direction.

Suitable for gates up to a maximum load of 10 kg.
For gate weights exceeding 10 kg, the use of multiple spring hinges is recommended to ensure reliable self-closing performance.
(0)
£ 179.97
[SS-HD-HNG-BOX] HEAVY DUTY STAINLESS STEEL (SATIN) SPRUNG GATE HINGE FOR FLAT SURFACE 316/L

HEAVY DUTY STAINLESS STEEL (SATIN) SPRUNG GATE HINGE FOR FLAT SURFACE 316/L

Self-Closing Gate Hinge for Square Section – Complete Set
Complete hinge assembly supplied with all required components and fitting details.

Designed for square section gate frames, this self-closing hinge provides a maximum opening range of 180° and is suitable for controlled closing applications.

For installation, position the gate in the fully closed position, then tension the spring by turning the adjustment bolt half a turn clockwise or anti-clockwise, depending on the required closing direction.

Suitable for gates up to a maximum load of 10 kg.
For gate weights exceeding 10 kg, we recommend using multiple spring hinges to ensure reliable closing performance.

Important:
Please take care not to over-tension the spring, as excessive tension may cause damage to the spring mechanism.

⸻
(0)
£ 179.97
[SS-NB-SW-150-UNI-DN40-304] DN40 (1.1/2" NB) SOCKET WELD 150# CONE SEAT UNION SS 304L

DN40 (1.1/2" NB) SOCKET WELD 150# CONE SEAT UNION SS 304L

Thread: 1.1/2" SW Socket Weld x Socket Weld
Suits an outside diameter (OD) of: 48.3mm
Material: Stainless
Grade: 304L
(0)
£ 34.89
[SS-NB-FLA-40-RF-SO-150-304] DN40 (1.1/2" NB) ASA 150# RF SLIP ON PLATE FLANGE SS 304

DN40 (1.1/2" NB) ASA 150# RF SLIP ON PLATE FLANGE SS 304

Flange inside diameter of: 49.5mm (B1)
Flange overall diameter: 127mm (D)
PCD: 98.4mm (K)
Bolt Holes: 4 off 12mm diameter (L)
Flange Thickness: 17.5mm (C1)
Diameter of Raised Face (RF): 65.1mm (D1)
Height of raised face: 3mm (F1)
Material: Stainless Steel
Grade: 304
Standards: EN1092-1
Flange Face: Raised Face
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Slip on Flange, Weld on, Stainless Steel, Steel, Raised Faced, RFSO

Part of our Flanges and Flanged Connections Range
(0)
£ 19.50
[SS-HYG-FLA-RF-SO-P16-DN40-304] 1.50" (DN40) PN16 (BORED 48.3mm / 1.1/2" OD NOMINAL BORE) RF SLIP ON FLANGE SS 304L

1.50" (DN40) PN16 (BORED 48.3mm / 1.1/2" OD NOMINAL BORE) RF SLIP ON FLANGE SS 304L

Suits an outside diameter (OD) of: 48.3mm
Material: Stainless
Grade: 304L
Standards: EN1092-1
Flange Face: Raised Face
Bolt Holes: 4 off to suit M16 Bolts
PCD: 110mm
Flange Diameter: 150mm
Inside diameter to suit 1.1/2" Nominal Bore Pipe

Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
FF, SO, Flat Face Flange, Slip on flange, Weld on Flange, Dairy Flange, Hygienic Flange, Sanitary Flange, Reduced Thick Flange. OD Flange.

Part of our Flanges and Flanged Connections Range
(0)
£ 28.08
[SS-HYG-HNG-15-BSP-101.6-304] 4" OD (4" OD) 1/2" BSP BOSSED HYGIENIC HINGED CLIPS SS 304

4" OD (4" OD) 1/2" BSP BOSSED HYGIENIC HINGED CLIPS SS 304

Best suited for a 4" / 101.6mm outside diameter
Clamp Material: Stainless
Grade: 304
1/2" BSP Bossed Connection

Applications:
Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

Alternative terminology:
Clip, Clamp, Support, Bracket
(0)
£ 7.71