Pipework Supplies UK | Pipes, Fittings, Valves & Flanges

DN10 (3/8" NB) NPT 150# (FXF) ELBOW 90° SS 316

Thread: 3/8" NPT Female x Female
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316
Elbow Angle: 90° (Degree)

Standards:
Nominal Bore, Threaded, Elbow, 90°, 90 Deg, Screwed, Low Pressure, 150 psi

£4.53 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 150# (MXF) ELBOW 90° SS 316

Side One Thread: 3/8" NPT Male
Side Two Thread: 3/8" NPT Female
Both Sides Suit an outside diameter (OD) of: 17.15mm
Male x Female Elbow, Also known as a 'Street Elbow '
Material: Stainless
Grade: 316

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi

£5.64 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 150# EQUAL TEE SS 316

Thread: 3/8" NPT Female x Female x Female
Suits an outside diameter of 17.1mm

Material: Stainless
Grade: 316

Standards:
Nominal Bore, Threaded, Equal, Tee, Tee Piece, Screwed, Low Pressure, 150 psi

£3.99 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 150# HEX CAP SS 316

Thread: 3/8" NPT Female
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316
Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi

Alternative terminology:
Female Cap, Termination, Blanking Cap, Cap End

£2.43 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 150# HEX HEAD PLUG SS 316

Thread: 3/8" NPT Male
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi

Alternative terminology:
Male Plug, Termination, Blanking Plug, Stop end

£2.07 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 150# ROUND CAP SS 316

Thread: 3/8" NPT Female
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316
Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi

Alternative terminology:
Female Cap, Termination, Blanking Cap, Cap End

£2.13 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 150# SQUARE HEAD PLUG SS 316

Thread: 3/8" NPT Male
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi

Alternative terminology:
Male Plug, Termination, Blanking Plug, Stop end

£1.71 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 3000 SERIES ELBOW 90° FXF SS 316

Thread: 3/8" NPT Female x Female
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316

£25.95 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 3000 SERIES HEXAGON NIPPLE MXM SS 316

Thread: 3/8" NPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316

£18.45 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 3000# EQUAL COUPLING SS 316

Thread: 3/8" NPT
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Coupling, Socket, Straight, Connector, Stainless Steel

£8.55 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 3000# EQUAL TEE SS 316

Thread: 3/8" NPT Female
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Equal Tee, Stainless Steel

£26.37 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 3000# FXF UNION SS 316

Thread: 3/8" NPT Female
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Union, FXF, Stainless Steel

£41.04 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 3000# HALF COUPLING SS 316

Thread: 3/8" NPT
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Half Coupling, Half Socket, Straight, Connector, Stainless Steel

£5.97 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 3000# HEX HEAD PLUG END SS 316

Thread: 3/8" NPT Male
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Hexagon Head Plug, Blanking, Termination, Stainless Steel

£7.05 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 3000# HEXAGON NIPPLE SS 316

Thread: 3/8" NPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Equal Nipple, Straight, Connector, Stainless Steel

£10.38 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 3000# ROUND CAP END SS 316

Thread: 3/8" NPT Female
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Round Cap End, Blanking, Termination, Stainless Steel

£6.69 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT 3PC (FXF) FB BALL VALVE LEVER OP. SS 316

Threaded: 3/8" NPT Female
Suits an outside diameter (OD) of: 17.15mm
Construction: 3 Piece
Body Material: 316 Stainless
Connection: NPT Female
Bore: Full Bore
Internals: PTFE Seals

Applications:
Water, Oil & Gas* - Heating and Plumbing, HVAC, Gasses* and Compressed Air, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems, Food & Beverage.

Alternative terminology:
Isolation Valve, Lever Valve, Handle Valve, Shut off Valve, Quarter 1/4 Turn

Part of our Isolation and Valves Range

£18.63 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT SCH80 PIPE NIPPLE T.B.E (2" LONG) SS 316

Thread: 3/8" NPT
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 304
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Pipe Nipple, TBE, , Stainless Steel

£10.38 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT SCH80 PIPE NIPPLE T.B.E (3" LONG) SS 316

Thread: 3/8" NPT
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 304
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Pipe Nipple, TBE, , Stainless Steel

£13.38 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) NPT SCH80 PIPE NIPPLE T.B.E (4" LONG) SS 316

Thread: 3/8" NPT
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 304
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Pipe Nipple, TBE, , Stainless Steel

£16.38 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) PN10/PN16/PN25/PN40 RF BSPP THREADED FLANGE S235JR BLACK

Flange outside diameter: 90mm (D)
Flange thickness: 16mm (C2)
Pitch Circle Diameter (PCD): 60mm (K)
Flange hub height: 22mm (H1)
Raised Face Height: 2mm (f1)
BSPP Thread: 3/8"
Bolt Holes: 4 off M12 bolts
Material: Mild Steel
Grade: S235 JR
Finish: Black
Standards: EN 1092-1
Pressure Rating: PN16
Flange Face: Raised Face
Certification Available: 2.1 BS EN 10204 Material Certification

Alternative terminology:
Threaded Flange, Screwed Flange, BSPP, Mild Steel, Carbon Steel, Flat Faced, PN16

Part of our Flanges and Flanged Connections Range

Contact us for pricing

DN10 (3/8" NB) PN10/PN16/PN25/PN40 RF BSPP THREADED FLANGE S235JR GALVANISED

Flange outside diameter: 90mm (D)
Flange thickness: 16mm (C2)
Pitch Circle Diameter (PCD): 60mm (K)
Flange hub height: 22mm (H1)
Raised Face Height: 2mm (f1)
BSPP Thread: 3/8"
Bolt Holes: 4 off M12 bolts
Material: Mild Steel
Grade: S235 JR
Finish: Galvanised
Standards: EN 1092-1
Pressure Rating: PN16
Flange Face: Raised Face
Certification Available: 2.1 BS EN 10204 Material Certification

Alternative terminology:
Threaded Flange, Screwed Flange, BSPP, Mild Steel, Carbon Steel, Flat Faced, PN16

Part of our Flanges and Flanged Connections Range

Contact us for pricing

DN10 (3/8" NB) PN10/PN16/PN25/PN40 RF BSPP THREADED FLANGE SS 304

Flange outside diameter: 90mm (D)
Flange thickness: 16mm (C2)
Pitch Circle Diameter (PCD): 60mm (K)
Flange hub height: 22mm (H1)
Raised Face Height: 2mm (f1)
BSPP Thread: 3/8"
Bolt Holes: 4 off M12 bolts
Material: Stainless Steel
Grade: 304

Standards: EN 1092-1
Pressure Rating: PN16
Flange Face: Raised Face
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Threaded Flange, Screwed Flange, BSPP, Stainless Steel, SS Steel, Bossed, PN16

Part of our Flanges and Flanged Connections Range

Contact us for pricing

DN10 (3/8" NB) PN10/PN16/PN25/PN40 RF BSPP THREADED FLANGE SS 316

Flange outside diameter: 90mm (D)
Flange thickness: 16mm (C2)
Pitch Circle Diameter (PCD): 60mm (K)
Flange hub height: 22mm (H1)
Raised Face Height: 2mm (f1)
BSPP Thread: 3/8"
Bolt Holes: 4 off M12 bolts
Material: Stainless Steel
Grade: 316

Standards: EN 1092-1
Pressure Rating: PN16
Flange Face: Raised Face
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Threaded Flange, Screwed Flange, BSPP, Stainless Steel, SS Steel, Bossed, PN16

Part of our Flanges and Flanged Connections Range

Contact us for pricing

DN10 (3/8" NB) PN6 RF BSPP THREADED FLANGE S235JR BLACK

Flange outside diameter: 75mm (D)
Flange thickness: 12mm (C2)
Pitch Circle Diameter (PCD): 50mm (K)
Flange hub height: 20mm (H1)
Raised Face Height: 2mm (f1)
BSPP Thread: 3/8"
Bolt Holes: 4 off M10 bolts
Material: Mild Steel
Grade: S235 JR
Finish: Black
Standards: EN 1092-1
Pressure Rating: PN6
Flange Face: Raised Face
Certification Available: 2.1 BS EN 10204 Material Certification

Alternative terminology:
Threaded Flange, Screwed Flange, BSPP, Mild Steel, Carbon Steel, Flat Faced, PN6

Part of our Flanges and Flanged Connections Range

Contact us for pricing

DN10 (3/8" NB) PN6 RF BSPP THREADED FLANGE S235JR GALVANISED

Flange outside diameter: 75mm (D)
Flange thickness: 12mm (C2)
Pitch Circle Diameter (PCD): 50mm (K)
Flange hub height: 20mm (H1)
Raised Face Height: 2mm (f1)
BSPP Thread: 3/8"
Bolt Holes: 4 off M10 bolts
Material: Mild Steel
Grade: S235 JR
Finish: Galvanised
Standards: EN 1092-1
Pressure Rating: PN6
Flange Face: Raised Face
Certification Available: 2.1 BS EN 10204 Material Certification

Alternative terminology:
Threaded Flange, Screwed Flange, BSPP, Mild Steel, Carbon Steel, Flat Faced, PN6

Part of our Flanges and Flanged Connections Range

Contact us for pricing

DN10 (3/8" NB) PN6 RF BSPP THREADED FLANGE SS 304

Flange outside diameter: 75mm (D)
Flange thickness: 12mm (C2)
Pitch Circle Diameter (PCD): 50mm (K)
Flange hub height: 20mm (H1)
Raised Face Height: 2mm (f1)
BSPP Thread: 3/8"
Bolt Holes: 4 off M10 bolts
Material: Stainless Steel
Grade: 304

Standards: EN 1092-1
Pressure Rating: PN6
Flange Face: Raised Face
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Threaded Flange, Screwed Flange, BSPP, Stainless Steel, SS Steel, Bossed, PN6

Part of our Flanges and Flanged Connections Range

Contact us for pricing

DN10 (3/8" NB) PN6 RF BSPP THREADED FLANGE SS 316

Flange outside diameter: 75mm (D)
Flange thickness: 12mm (C2)
Pitch Circle Diameter (PCD): 50mm (K)
Flange hub height: 20mm (H1)
Raised Face Height: 2mm (f1)
BSPP Thread: 3/8"
Bolt Holes: 4 off M10 bolts
Material: Stainless Steel
Grade: 316

Standards: EN 1092-1
Pressure Rating: PN6
Flange Face: Raised Face
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Threaded Flange, Screwed Flange, BSPP, Stainless Steel, SS Steel, Bossed, PN6

Part of our Flanges and Flanged Connections Range

Contact us for pricing

Per Meter

DN10 (3/8" NB) SCHEDULE 40s STAINLESS SEAMLESS PIPE 304

Outside Diameter (OD): 17.15mm
Wall Thickness (WT): 2.31mm (Sch40)
Material: Stainless
Grade: 304
Standards: ASTM A312
Standard Length: 6 meters
Weight Per Meter: 0.87
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.

Part of our Stainless Pipes and Tubes Range

Contact us for pricing

Per Meter

DN10 (3/8" NB) SCHEDULE 40s STAINLESS SEAMLESS PIPE 316

Outside Diameter (OD): 17.15mm
Wall Thickness (WT): 2.31mm
Material: Stainless
Grade: 316
Standards: ASTM A312
Standard Length: 6 meter Random
Weight Per Meter: 0.87kg
Construction: Seamless
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.

Part of our Stainless Pipes and Tubes Range

£36.75 per metre

List Price – Sign in to view Trade Prices

Per Meter

DN10 (3/8" NB) SCHEDULE 40s STAINLESS WELDED PIPE 316

Outside Diameter (OD): 17.15mm
Wall Thickness (WT): 2.31mm (Sch40)
Material: Stainless
Grade: 316
Standards: ASTM A312
Standard Length: 6 meters
Weight Per Meter: 0.87
Construction: Welded
Certification Available: 3.1 BS EN 10204 Material Certification

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.

Part of our Stainless Pipes and Tubes Range

£15.18 per metre

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) SOCKET WELD 3PC FB BALL VALVE LEVER OP. SS 316

Threaded: 3/8" NB Socket Weld (SW)
Suits an outside diameter (OD) of: 17.15mm
Construction: 3 Piece
Body Material: 316 Stainless
Connection: Socket Weld
Bore: Full Bore
Internals: PTFE Seals

Applications:
Water, Oil & Gas* - Heating and Plumbing, HVAC, Gasses* and Compressed Air, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems, Food & Beverage.

Alternative terminology:
Isolation Valve, Lever Valve, Handle Valve, Shut off Valve, Quarter 1/4 Turn

Part of our Isolation and Valves Range

£14.85 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) SW 150# ELBOW 45° SS 316

Thread: 3/8" SW (Socket Weld)
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316
Elbow Angle: 45° (Degree)

Standards:
Nominal Bore, Socket Weld, Elbow, 45°, 45 Deg, Weldable, Low Pressure, 150 psi

£4.62 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) SW 150# ELBOW 90° SS 316

Thread: 3/8" SW (Socket Weld)
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316
Elbow Angle: 90° (Degree)

Standards:
Nominal Bore, Socket Weld, Elbow, 90°, 90 Deg, Weldable, Low Pressure, 150 psi

£4.74 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) SW 150# EQUAL TEE SS 316

Thread: 3/8" SW (Socket Weld)
Suits an outside diameter of 17.1mm

Material: Stainless
Grade: 316

Standards:
Nominal Bore, SW (Socket Weld), Equal, Tee, Tee Piece, Weldable, Low Pressure, 150 psi

£6.03 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) SW 150# ROUND CAP SS 316

Thread: 3/8" SW (Socket Weld)
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316
Standards:
Nominal Bore, SW (Socket Weld), Weldable, Low Pressure, 150 psi

Alternative terminology:
SW Cap, Termination, Blanking Cap, Cap End

£2.37 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) SW 3000# EQUAL COUPLING SS 316

Connection: 3/8" SW
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Coupling, Socket, Straight, Connector, Stainless Steel

£8.55 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) SW 3000# EQUAL TEE SS 316

Connection: 3/8" SW (Socket Weld)
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Equal Tee, Stainless Steel

£26.37 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) SW 3000# HALF COUPLING SS 316

Connection: 3/8" SW (Socket Weld)
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Half Coupling, Half Socket, Straight, Connector, Stainless Steel

£5.70 each

List Price – Sign in to view Trade Prices

DN10 (3/8" NB) SW 3000# ROUND CAP END SS 316

Connection: 3/8" SW (Socket Weld)
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Round Cap End, Blanking, Termination, Stainless Steel

£8.28 each

List Price – Sign in to view Trade Prices

DN10 (⅜" NB) BSPT 3000# FXF ELBOW 45° SS 316

Thread: ⅜" BSPT Female
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Elbow, FXF, 45°, 45 Degree, Stainless Steel

£19.08 each

List Price – Sign in to view Trade Prices

DN10 (⅜" NB) BSPT 3000# FXF ELBOW 90° SS 316

Thread: ⅜" BSPT Female
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Elbow, FXF, 90°, 90 Degree, Stainless Steel

£20.40 each

List Price – Sign in to view Trade Prices

DN10 (⅜" NB) NPT 3000# FXF ELBOW 45° SS 316

Thread: ⅜" NPT Female
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Elbow, FXF, 45°, 45 Degree, Stainless Steel

£19.08 each

List Price – Sign in to view Trade Prices

DN10 (⅜" NB) NPT 3000# FXF ELBOW 90° SS 316

Thread: ⅜" NPT Female
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Elbow, FXF, 90°, 90 Degree, Stainless Steel

£20.13 each

List Price – Sign in to view Trade Prices

DN10 (⅜" NB) SW 3000# FXF ELBOW 45° SS 316

Connection: ⅜" SW (Socket Weld)
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Elbow, FXF, 45°, 45 Degree, Stainless Steel

£10.20 each

List Price – Sign in to view Trade Prices

DN10 (⅜" NB) SW 3000# FXF ELBOW 90° SS 316

Connection: ⅜" SW (Socket Weld)
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Stainless Steel
Grade: 316
Construction: Forged Stainless Steel
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Elbow, FXF, 90°, 90 Degree, Stainless Steel

£14.43 each

List Price – Sign in to view Trade Prices

DN10 DIN UNION NUT SS 304 (DIN PART 1 OF 4)

Suits a DN10 DIN Union
Material: Stainless
Grade: 304

Applications: Hygienic, Dairy & Sanitary - Dairy Processing, Brewing / Breweries / Beverage Production, Distilleries, Water Treatment, Waste Water, Chemicals, Bottling Plants, Medical & Pharmaceutical, Hospitals.

£5.58 each

List Price – Sign in to view Trade Prices

DN10 PN40 RF BOSSED SLIP ON FLANGE CS S235JR

Flange outside diameter: 90mm (D)
Flange inside diameter: 18.0mm (B1)
Flange thickness (C2): 16mm
Pitch Circle Diameter (PCD): 60mm (K)
Hub height: 22mm (H1)
Neck diameter: 30mm (N2)
Raised Face Diameter: 40mm (d1)
Height of Raised Face: 2mm (f1)
Bolt Holes: 4 off 14mm diameter (L)
Material: Mild Steel
Grade: S235 JR
Standards: EN1092-1
Flange Face: Raised Face
Certification Available: 2.1 BS EN 10204 Material Certification

Alternative terminology:
Bossed Slip on Flange, Weld on, Mild Steel, Carbon Steel, Raised Faced, SOB

Part of our Flanges and Flanged Connections Range

Contact us for pricing

DN10 PN6 RF BOSSED SLIP ON FLANGE CS S235JR

Flange outside diameter: 75mm (D)
Flange inside diameter: 18.0mm (B1)
Flange thickness (C2): 12mm
Pitch Circle Diameter (PCD): 50mm (K)
Hub height: 20mm (H1)
Neck diameter: 25mm (N2)
Raised Face Diameter: 35mm (d1)
Height of Raised Face: 2mm (f1)
Bolt Holes: 4 off 11mm diameter (L)
Material: Mild Steel
Grade: S235 JR
Standards: EN1092-1
Flange Face: Raised Face
Certification Available: 2.1 BS EN 10204 Material Certification

Alternative terminology:
Bossed Slip on Flange, Weld on, Mild Steel, Carbon Steel, Raised Faced, SOB

Part of our Flanges and Flanged Connections Range

Contact us for pricing

DN10 X 6 (3/8" X 1/8" NB) BSP BLACK HEAVY WEIGHT REDUCING BUSH

Side 1 threaded: 3/8" BSPT Male
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Mild Steel
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Mild Steel (Formally referred to as Wrought Iron BS1740), EN 10241 & EN 10255

Alternative terminology:
Reducing Bush, Mild Steel, Carbon Seel, Wrought Iron, Heavy Weight, Threaded, Screwed, Fittings.

£3.36 each

List Price – Sign in to view Trade Prices

DN10 X 6 (3/8" X 1/8" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/8" BSPP Female
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£1.23 each

List Price – Sign in to view Trade Prices

DN10 X 6 (3/8" X 1/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/8" BSPP Female
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£2.07 each

List Price – Sign in to view Trade Prices

DN10 X 6 (3/8" X 1/8" NB) BSPT REDUCING BUSH SS 316

Side 1 threaded: 3/8" BSPT Male
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/8" BSPT Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Forged Stainless Steel
Grade: 316

Standards:
BS3799, ANSI B16.11 MSS SP-83, MSS SP-95, MSS SP-97

Alternative terminology:
Forged Stainless Steel,Stainless Steel, Reducing Bush, Threaded, Screwed, , Fittings.

£7.41 each

List Price – Sign in to view Trade Prices

DN10 X 6 (3/8" X 1/8" NB) BSPT BLACK FORGED STEEL REDUCING BUSH

Side 1 threaded: 3/8" BSPT Male
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/8" BSPT Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Forged Steel A105N
Finish: Black Self Colour

Standards:
BS3799, ANSI B16.11 MSS SP-83, MSS SP-95, MSS SP-97

Alternative terminology:
Forged Steel, Carbon Steel, , Reducing Bush, Threaded, Screwed, , Fittings.

Contact us for pricing

DN10 X 6 (3/8" X 1/8" NB) BSPT GALVANISED FORGED STEEL REDUCING BUSH

Side 1 threaded: 3/8" BSPT Male
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/8" BSPT Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Forged Steel Galvanised (HDG) A105N
Finish:

Standards:
BS3799, ANSI B16.11 MSS SP-83, MSS SP-95, MSS SP-97

Alternative terminology:
Forged Steel Galvanised (HDG), Carbon Steel, , Reducing Bush, Threaded, Screwed, , Fittings.

Contact us for pricing

DN10 X 6 (3/8" X 1/8" NB) NPT REDUCING BUSH SS 316

Side 1 threaded: 3/8" NPT Male
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/8" NPT Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Forged Stainless Steel
Grade: 316

Standards:
BS3799, ANSI B16.11 MSS SP-83, MSS SP-95, MSS SP-97

Alternative terminology:
Forged Stainless Steel,Stainless Steel, Reducing Bush, Threaded, Screwed, , Fittings.

£7.26 each

List Price – Sign in to view Trade Prices

DN10 X 6 (3/8" X 1/8" NB) NPT BLACK FORGED STEEL REDUCING BUSH

Side 1 threaded: 3/8" NPT Male
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/8" NPT Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Forged Steel A105N
Finish: Black Self Colour

Standards:
BS3799, ANSI B16.11 MSS SP-83, MSS SP-95, MSS SP-97

Alternative terminology:
Forged Steel, Carbon Steel, , Reducing Bush, Threaded, Screwed, , Fittings.

Contact us for pricing

DN10 X 6 (3/8" X 1/8" NB) NPT GALVANISED FORGED STEEL REDUCING BUSH

Side 1 threaded: 3/8" NPT Male
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/8" NPT Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Forged Steel Galvanised (HDG) A105N
Finish:

Standards:
BS3799, ANSI B16.11 MSS SP-83, MSS SP-95, MSS SP-97

Alternative terminology:
Forged Steel Galvanised (HDG), Carbon Steel, , Reducing Bush, Threaded, Screwed, , Fittings.

Contact us for pricing

DN10 X 8 (3/8" X 1/4" NB) BSP BLACK HEAVY WEIGHT REDUCING BUSH

Side 1 threaded: 3/8" BSPT Male
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 13.72mm

Material: Mild Steel
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Mild Steel (Formally referred to as Wrought Iron BS1740), EN 10241 & EN 10255

Alternative terminology:
Reducing Bush, Mild Steel, Carbon Seel, Wrought Iron, Heavy Weight, Threaded, Screwed, Fittings.

£3.36 each

List Price – Sign in to view Trade Prices

DN10 X 8 (3/8" X 1/4" NB) BSP BLACK MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/8" BSPP Female
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 13.72mm

Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£1.23 each

List Price – Sign in to view Trade Prices

DN10 X 8 (3/8" X 1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/8" BSPP Female
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 13.72mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£1.29 each

List Price – Sign in to view Trade Prices

Account FORMS

Search our pipework store