Skip to Content

Integraflow Store 

List 600
Sort By: Name (A-Z)
DN 8 (1/4" NB) NPT 150# ROUND CAP SS 316
Thread: 1/4" NPT Female
Suits an outside diameter (OD) of: 13.72mm
Material: Stainless
Grade: 316
Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi

Alternative terminology:
Female Cap, Termination, Blanking Cap, Cap End
£ 3.99 3.99 GBP
DN 8 (1/4" NB) NPT 150# SQUARE HEAD PLUG SS 316
Thread: 1/4" NPT Male
Suits an outside diameter (OD) of: 13.72mm
Material: Stainless
Grade: 316

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi

Alternative terminology:
Male Plug, Termination, Blanking Plug, Stop end
£ 4.62 4.62 GBP
DN 8 (1/4" NB) SW 150# EQUAL FULL SOCKET SS 316
Connection: 1/4" SW (Socket Weld)
Suits an outside diameter (OD) of: 13.72mm
Material: Stainless
Grade: 316
£ 6.23 6.23 GBP
DN 8 (1/4" NB) SW 150# ROUND CAP SS 316
Thread: 1/4" SW (Socket Weld)
Suits an outside diameter (OD) of: 13.72mm
Material: Stainless
Grade: 316
Standards:
Nominal Bore, SW (Socket Weld), Weldable, Low Pressure, 150 psi

Alternative terminology:
SW Cap, Termination, Blanking Cap, Cap End
£ 5.11 5.11 GBP
DN 8 X 3 (1/4" X 1/8" NB) BSP 150# REDUCING HEX BUSH SS 316
Side One Thread: 1/4" BSPT Male
Suits an outside diameter (OD) of: 13.72mm
Side Two Thread: 1/8" BSPP Female
Suits an outside diameter (OD) of: 10.29mm
Material: Stainless
Grade: 316
£ 3.43 3.43 GBP
DN 8 X 3 (1/4" X 1/8" NB) BSP 150# REDUCING HEX NIPPLE SS 316
Side One Thread: 1/4" BSPT Male
Suits an outside diameter (OD) of: 13.72mm
Side Two Thread: 1/8" BSPT Male
Suits an outside diameter (OD) of: 10.29mm
Material: Stainless
Grade: 316
£ 3.99 3.99 GBP
DN 8 X 3 (1/4" X 1/8" NB) BSP 150# REDUCING SOCKET SS 316
Side One Thread: 1/4" BSP Female
Suits an outside diameter (OD) of: 13.72mm
Side Two Thread: 1/8" BSP Female
Suits an outside diameter (OD) of: 10.29mm
Material: Stainless
Grade: 316
£ 6.02 6.02 GBP
DN 8 X 3 (1/4" X 1/8" NB) NPT 150# REDUCING HEX BUSH SS 316
Side One Thread: 1/4" NPT Male
Suits an outside diameter (OD) of: 13.72mm
Side Two Thread: 1/8" NPT Female
Suits an outside diameter (OD) of: 10.29mm
Material: Stainless
Grade: 316
£ 4.48 4.48 GBP
DN 8 X 3 (1/4" X 1/8" NB) NPT 150# REDUCING HEX NIPPLE SS 316
Side One Thread: 1/4" NPT Male
Suits an outside diameter (OD) of: 13.72mm
Side Two Thread: 1/8" NPT Male
Suits an outside diameter (OD) of: 10.29mm
Material: Stainless
Grade: 316
£ 6.16 6.16 GBP
DN 8 X 3 (1/4" X 1/8" NB) NPT 150# REDUCING SOCKET SS 316
Side One Thread: 1/4" NPT Female
Suits an outside diameter (OD) of: 13.72mm
Side Two Thread: 1/8" NPT Female
Suits an outside diameter (OD) of: 10.29mm
Material: Stainless
Grade: 316
£ 5.25 5.25 GBP
DN 8 X 3 (1/4" X 1/8" NB) SW 150# REDUCING SOCKET SS 316
Side One Connection: 1/4" SW (Socket Weld)
Suits an outside diameter (OD) of: 13.72mm
Side Two Connection: 1/8" SW (Socket Weld)
Suits an outside diameter (OD) of: 10.29mm
Material: Stainless
Grade: 316
£ 6.72 6.72 GBP
DN10 (3/8" NB) BSP 150# (FXF) CONE SEAT UNION SS 316
Thread: 3/8" BSPP Female x Female
Suits an outside diameter (OD) of: 17.1mm
Material: Stainless
Grade: 316
£ 12.60 12.6 GBP
DN10 (3/8" NB) BSP 150# (FXF) ELBOW 45° SS 316
Thread: 3/8" BSPP Female x Female
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316
Elbow Angle: 45° (Degree)

Standards:
Nominal Bore, Threaded, Elbow, 45°, 45 Deg, Screwed, Low Pressure, 150 psi
£ 5.18 5.18 GBP
DN10 (3/8" NB) BSP 150# (FXF) ELBOW 90° SS 316
Thread: 3/8" BSPP Female x Female
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316
Elbow Angle: 90° (Degree)

Standards:
Nominal Bore, Threaded, Elbow, 90°, 90 Deg, Screwed, Low Pressure, 150 psi
£ 5.32 5.32 GBP
DN10 (3/8" NB) BSP 150# (MXF) CONE SEAT UNION SS 316
Thread: 3/8" BSPP Male x Female
Suits an outside diameter (OD) of: 17.1mm
Material: Stainless
Grade: 316

Alternative terminology:
Male x Female, MF, MXF, Union, Threaded, Screwed, Street Union
£ 13.65 13.65 GBP
DN10 (3/8" NB) BSP 150# (MXF) ELBOW 90° SS 316
Side One Thread: 3/8" BSPT Male
Side Two Thread: 3/8" BSPP Female
Both Sides Suit an outside diameter (OD) of: 17.15mm
Male x Female Elbow, Also known as a 'Street Elbow '
Material: Stainless
Grade: 316

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi
£ 5.46 5.46 GBP
DN10 (3/8" NB) BSP 150# BARREL NIPPLE SS 316
Thread: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316
£ 3.99 3.99 GBP
DN10 (3/8" NB) BSP 150# EQUAL FULL SOCKET SS 316
Thread: 3/8" BSP Female x Female
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316
£ 5.74 5.74 GBP
DN10 (3/8" NB) BSP 150# EQUAL TEE SS 316
Thread: 3/8" BSPP Female x Female x Female
Suits an outside diameter of 17.1mm

Material: Stainless
Grade: 316

Standards:
Nominal Bore, Threaded, Equal, Tee, Tee Piece, Screwed, Low Pressure, 150 psi
£ 6.37 6.37 GBP
DN10 (3/8" NB) BSP 150# HALF SOCKET SS 316
Thread: 3/8" BSP Female x Female
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316
£ 2.80 2.8 GBP
DN10 (3/8" NB) BSP 150# HEX CAP SS 316
Thread: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316
Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi

Alternative terminology:
Female Cap, Termination, Blanking Cap, Cap End
£ 3.99 3.99 GBP
DN10 (3/8" NB) BSP 150# HEX HEAD PLUG SS 316
Thread: 3/8" BSPT Male
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi

Alternative terminology:
Male Plug, Termination, Blanking Plug, Stop end
£ 5.32 5.32 GBP
DN10 (3/8" NB) BSP 150# HEX HEAD PLUG SS 316
£ 5.32 5.32 GBP
DN10 (3/8" NB) BSP 150# HEX NIPPLE SS 316
Thread: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi
£ 3.15 3.15 GBP
DN10 (3/8" NB) BSP 150# ROUND CAP SS 316
Thread: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316
Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi

Alternative terminology:
Female Cap, Termination, Blanking Cap, Cap End
£ 3.43 3.43 GBP
DN10 (3/8" NB) BSP 150# SQUARE HEAD PLUG SS 316
Thread: 3/8" BSPT Male
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi

Alternative terminology:
Male Plug, Termination, Blanking Plug, Stop end
£ 5.32 5.32 GBP
DN10 (3/8" NB) BSP 150# WELD NIPPLE SS 316
Side One Thread: 3/8" BSPT Male
Side Two Plain: 3/8" Buttweld
Both sides suit an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi
£ 3.22 3.22 GBP
DN10 (3/8" NB) BSP 2PC (FXF) BRASS BALL VALVE BLUE LEVER
Suits an outside diameter (OD) of: 17.15mm
Construction: 2 Piece
Body Material: Brass
Thread: BSP Parallel Thread Female x Female
Bore: Full Bore

Applications:
Water, Oil & Gas* - Heating and Plumbing, HVAC, Gasses* and Compressed Air, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems, Food & Beverage.

Alternative terminology:
Isolation Valve, Lever Valve, Handle Valve, Shut off Valve, Quarter 1/4 Turn
£ 10.78 10.78 GBP
DN10 (3/8" NB) BSP 2PC (FXF) BRASS BALL VALVE EN331 GAS YELLOW LEVER
Suits an outside diameter (OD) of: 17.15mm
Construction: 2 Piece
Body Material: Brass
Thread: BSP Parallel Thread Female x Female
Bore: Full Bore
Approval: EN331: 1998+ A1:2015
Gas installations for buildings (CPR)
WRAS Approved

Applications:
Water, Oil & Gas* - Heating and Plumbing, HVAC, Gasses* and Compressed Air, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems, Food & Beverage.

Alternative terminology:
Isolation Valve, Lever Valve, Handle Valve, Shut off Valve, Quarter 1/4 Turn
£ 15.05 15.05 GBP
DN10 (3/8" NB) BSP 2PC (FXF) BRASS BALL VALVE RED LEVER
Suits an outside diameter (OD) of: 17.15mm
Construction: 2 Piece
Body Material: Brass
Thread: BSP Parallel Thread Female x Female
Bore: Full Bore

Alternative terminology:
Isolation Valve, Lever Valve, Handle Valve, Shut off Valve, Quarter 1/4 Turn
£ 10.78 10.78 GBP
DN10 (3/8" NB) BSP 2PC (FXF) BRASS BALL VALVE RED LOCKING LEVER
Suits an outside diameter (OD) of: 17.15mm
Construction: 2 Piece
Body Material: Brass
Thread: BSP Parallel Thread Female x Female
Bore: Full Bore

Alternative terminology:
Isolation Valve, Locking Lever Valve, Handle Valve, Shut off Valve, Quarter 1/4 Turn
£ 16.45 16.45 GBP
DN10 (3/8" NB) BSP 2PC (FXF) BRASS BALL VALVE YELLOW LOCKING LEVER
Suits an outside diameter (OD) of: 17.15mm
Construction: 2 Piece
Body Material: Brass
Thread: BSP Parallel Thread Female x Female
Bore: Full Bore

Alternative terminology:
Isolation Valve, Locking Lever Valve, Handle Valve, Shut off Valve, Quarter 1/4 Turn
£ 16.45 16.45 GBP
DN10 (3/8" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (40mm LONG)
Threaded both sides: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Overall Length: 40mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 3.43 3.43 GBP
DN10 (3/8" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (50mm LONG)
Threaded both sides: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Overall Length: 50mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 4.13 4.13 GBP
DN10 (3/8" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (60mm LONG)
Threaded both sides: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Overall Length: 60mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 4.06 4.06 GBP
DN10 (3/8" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (80mm LONG)
Threaded both sides: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Overall Length: 80mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 4.27 4.27 GBP
DN10 (3/8" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (100mm LONG)
Threaded both sides: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Overall Length: 100mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 4.62 4.62 GBP
DN10 (3/8" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (120mm LONG)
Threaded both sides: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Overall Length: 120mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 5.67 5.67 GBP
DN10 (3/8" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (150mm LONG)
Threaded both sides: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Overall Length: 150mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 6.58 6.58 GBP
DN10 (3/8" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (180mm LONG)
Threaded both sides: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Overall Length: 180mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 9.24 9.24 GBP