1. Products
2. Mild Steel
3. Nominal Bore
4. Fittings
5. Threaded
6. Malleable Iron (150 psi)
7. BSP Galvanised
8. Bends 90°

Bends 90°

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 1/4" BSPP Female
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.

£ 3.60 3.6 GBP

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 1/4" BSPP Female
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.

£ 3.64 3.64 GBP

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.

£ 4.36 4.36 GBP

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.

£ 4.20 4.2 GBP

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON FXF LONG RADIUS BEND 90

Both sides threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.

£ 4.64 4.64 GBP

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON FXF SHORT RADIUS BEND 90

Both sides threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.

£ 3.72 3.72 GBP

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON MXF LONG RADIUS BEND 90

Both sides threaded: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.

£ 4.12 4.12 GBP

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.

£ 7.32 7.32 GBP

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON FXF SHORT RADIUS BEND 90°

Both sides threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.

£ 5.20 5.2 GBP

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.

£ 7.20 7.2 GBP

DN25 (1" NB) BSP GALVANISED MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 1" BSPP Female x Female
Suits an outside diameter (OD) of: 33.4mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.

£ 9.84 9.84 GBP

DN25 (1" NB) BSP GALVANISED MALLEABLE IRON FXF SHORT RADIUS BEND 90°

Both sides threaded: 1" BSPP Female x Female
Suits an outside diameter (OD) of: 33.4mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.

£ 7.88 7.88 GBP

DN25 (1" NB) BSP GALVANISED MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 1" BSPP Female x Female
Suits an outside diameter (OD) of: 33.4mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.

£ 9.84 9.84 GBP

DN32 (1.1/4" NB) BSP GALVANISED MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 1.1/4" BSPP Female
Suits an outside diameter (OD) of: 42.4mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.

£ 15.56 15.56 GBP

DN32 (1.1/4" NB) BSP GALVANISED MALLEABLE IRON FXF SHORT RADIUS BEND 90°

Both sides threaded: 1.1/4" BSPP Female
Suits an outside diameter (OD) of: 42.4mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.

£ 12.28 12.28 GBP

DN32 (1.1/4" NB) BSP GALVANISED MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 1.1/4" BSPP Female
Suits an outside diameter (OD) of: 42.4mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.

£ 15.60 15.6 GBP

DN40 (1.1/2" NB) BSP GALVANISED MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 1.1/2" BSPP Female
Suits an outside diameter (OD) of: 48.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.

£ 20.28 20.28 GBP

DN40 (1.1/2" NB) BSP GALVANISED MALLEABLE IRON FXF SHORT RADIUS BEND 90°

Both sides threaded: 1.1/2" BSPP Female
Suits an outside diameter (OD) of: 48.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.

£ 16.52 16.52 GBP

DN40 (1.1/2" NB) BSP GALVANISED MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 1.1/2" BSPP Female
Suits an outside diameter (OD) of: 48.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.

£ 20.48 20.48 GBP

DN50 (2" NB) BSP GALVANISED MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 2" BSPP Female
Suits an outside diameter (OD) of: 60.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.

£ 28.08 28.08 GBP

DN50 (2" NB) BSP GALVANISED MALLEABLE IRON FXF SHORT RADIUS BEND 90°

Both sides threaded: 2" BSPP Female
Suits an outside diameter (OD) of: 60.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.

£ 27.80 27.8 GBP

DN50 (2" NB) BSP GALVANISED MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 2" BSPP Female
Suits an outside diameter (OD) of: 60.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.

£ 33.00 33.0 GBP

DN65 (2.1/2" NB) BSP GALVANISED MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 2.1/2" BSPP Female
Suits an outside diameter (OD) of: 76.2mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.

£ 91.24 91.24 GBP

DN65 (2.1/2" NB) BSP GALVANISED MALLEABLE IRON FXF SHORT RADIUS BEND 90°

Both sides threaded: 2.1/2" BSPP Female
Suits an outside diameter (OD) of: 76.2mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.

£ 56.48 56.48 GBP

DN65 (2.1/2" NB) BSP GALVANISED MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 2.1/2" BSPP Female
Suits an outside diameter (OD) of: 76.2mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.

£ 89.64 89.64 GBP

DN80 (3" NB) BSP GALVANISED MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 3" BSPP Female
Suits an outside diameter (OD) of: 88.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.

£ 115.36 115.36 GBP

DN80 (3" NB) BSP GALVANISED MALLEABLE IRON FXF SHORT RADIUS BEND 90°

Both sides threaded: 3" BSPP Female
Suits an outside diameter (OD) of: 88.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Short, Bend, Figure 193, Screwed, Fittings.

£ 75.76 75.76 GBP

DN80 (3" NB) BSP GALVANISED MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 3" BSPP Female
Suits an outside diameter (OD) of: 88.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.

£ 188.04 188.04 GBP

DN100 (4" NB) BSP GALVANISED MALLEABLE IRON FXF LONG RADIUS BEND 90°

Both sides threaded: 4" BSPP Female
Suits an outside diameter (OD) of: 114.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Bend, Figure 193, Screwed, Fittings.

£ 197.68 197.68 GBP

DN100 (4" NB) BSP GALVANISED MALLEABLE IRON MXF LONG RADIUS BEND 90°

Both sides threaded: 4" BSPP Female
Suits an outside diameter (OD) of: 114.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Sweeping, Swept, Long, Street, MF, MXF Bend, Figure 192, Screwed, Fittings.

£ 188.04 188.04 GBP