1. Products
2. Mild Steel
3. Nominal Bore
4. Fittings
5. Threaded
6. Malleable Iron (150 psi)
7. BSP Galvanised
8. Reducing Bushes

Reducing Bushes

DN8 X 6 (1/4" X 1/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 13.72mm
Side 2 threaded: 1/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 2.76 2.76 GBP

DN10 X 6 (3/8" X 1/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/8" BSPP Female
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 2.76 2.76 GBP

DN10 X 8 (3/8" X 1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/8" BSPP Female
Side 1 suits an outside diameter (OD) of: 17.15mm
Side 2 threaded: 1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 13.72mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 1.72 1.72 GBP

DN15 X 6 (1/2" X 1/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 21.3mm
Side 2 threaded: 1/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 3.68 3.68 GBP

DN15 X 10 (1/2" X 3/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 21.3mm
Side 2 threaded: 3/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 17.15mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 1.60 1.6 GBP

DN20 X 6 (3/4" X 1/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 26.9mm
Side 2 threaded: 1/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 10.29mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 2.84 2.84 GBP

DN20 X 8 (3/4" X 1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 26.9mm
Side 2 threaded: 1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 13.72mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 2.84 2.84 GBP

DN20 X 10 (3/4" X 3/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 26.9mm
Side 2 threaded: 3/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 17.15mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 2.16 2.16 GBP

DN20 X 15 (3/4" X 1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 26.9mm
Side 2 threaded: 1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 21.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 1.88 1.88 GBP

DN25 X 8 (1" X 1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1" BSPP Female
Side 1 suits an outside diameter (OD) of: 33.4mm
Side 2 threaded: 1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 13.72mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 3.84 3.84 GBP

DN25 X 10 (1" X 3/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1" BSPP Female
Side 1 suits an outside diameter (OD) of: 33.4mm
Side 2 threaded: 3/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 17.15mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 3.48 3.48 GBP

DN25 X 15 (1" X 1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1" BSPP Female
Side 1 suits an outside diameter (OD) of: 33.4mm
Side 2 threaded: 1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 21.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 2.28 2.28 GBP

DN25 X 20 (1" X 3/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1" BSPP Female
Side 1 suits an outside diameter (OD) of: 33.4mm
Side 2 threaded: 3/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 26.9mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 2.56 2.56 GBP

DN32 X 8 (1.1/4" X 1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1.1/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 42.4mm
Side 2 threaded: 1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 13.72mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 8.40 8.4 GBP

DN32 X 10 (1.1/4" X 3/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1.1/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 42.4mm
Side 2 threaded: 3/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 17.15mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 6.64 6.64 GBP

DN32 X 15 (1.1/4" X 1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1.1/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 42.4mm
Side 2 threaded: 1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 21.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 4.16 4.16 GBP

DN32 X 20 (1.1/4" X 3/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1.1/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 42.4mm
Side 2 threaded: 3/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 26.9mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 4.28 4.28 GBP

DN32 X 25 (1.1/4" X 1" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1.1/4" BSPP Female
Side 1 suits an outside diameter (OD) of: 42.4mm
Side 2 threaded: 1" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 33.4mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 3.64 3.64 GBP

DN40 X 8 (1.1/2" X 1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1.1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 48.3mm
Side 2 threaded: 1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 13.72mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 12.00 12.0 GBP

DN40 X 10 (1.1/2" X 3/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1.1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 48.3mm
Side 2 threaded: 3/8" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 17.15mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 5.88 5.88 GBP

DN40 X 15 (1.1/2" X 1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1.1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 48.3mm
Side 2 threaded: 1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 21.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 5.04 5.04 GBP

DN40 X 20 (1.1/2" X 3/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1.1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 48.3mm
Side 2 threaded: 3/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 26.9mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 5.04 5.04 GBP

DN40 X 25 (1.1/2" X 1" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1.1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 48.3mm
Side 2 threaded: 1" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 33.4mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 4.32 4.32 GBP

DN40 X 32 (1.1/2" X 1.1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 1.1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 48.3mm
Side 2 threaded: 1.1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 42.4mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 3.96 3.96 GBP

DN50 X 10 (2" X 3/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 2" BSPP Female
Side 1 suits an outside diameter (OD) of: 60.3mm
Side 2 threaded: 1.1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 17.15mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 17.16 17.16 GBP

DN50 X 15 (2" X 1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 2" BSPP Female
Side 1 suits an outside diameter (OD) of: 60.3mm
Side 2 threaded: 1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 21.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 9.28 9.28 GBP

DN50 X 20 (2" X 3/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 2" BSPP Female
Side 1 suits an outside diameter (OD) of: 60.3mm
Side 2 threaded: 3/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 26.9mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 9.16 9.16 GBP

DN50 X 25 (2" X 1" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 2" BSPP Female
Suits 1 suits an outside diameter (OD) of: 60.3mm
Side 2 threaded: 1" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 33.4mm

Material: Malleable Iron
Finish: Galvanised

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 7.44 7.44 GBP

DN50 X 32 (2" X 1.1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 2" BSPP Female
Side 1 suits an outside diameter (OD) of: 60.3mm
Side 2 threaded: 1.1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 42.4mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 7.20 7.2 GBP

DN50 X 40 (2" X 1.1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 2" BSPP Female
Side 1 suits an outside diameter (OD) of: 60.3mm
Side 2 threaded: 1.1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 48.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 7.20 7.2 GBP

DN65 X 15 (2.1/2" X 1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 2.1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 76.2mm
Side 2 threaded: 1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 21.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 12.52 12.52 GBP

DN65 X 20 (2.1/2" X 3/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 2.1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 76.2mm
Side 2 threaded: 3/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 26.9mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 43.52 43.52 GBP

DN65 X 25 (2.1/2" X 1" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 2.1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 76.2mm
Side 2 threaded: 1" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 33.4mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 16.68 16.68 GBP

DN65 X 32 (2.1/2" X 1.1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 2.1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 76.2mm
Side 2 threaded: 1.1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 42.4mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 18.92 18.92 GBP

DN65 X 40 (2.1/2" X 1.1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 2.1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 76.2mm
Side 2 threaded: 1.1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 48.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 18.44 18.44 GBP

DN65 X 50 (2.1/2" X 2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 2.1/2" BSPT Male
Suits 1 suits an outside diameter (OD) of: 76.2mm
Side 2 threaded: 2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 60.3mm

Material: Malleable Iron
Finish: Galvanised

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 14.08 14.08 GBP

DN80 X 15 (3" X 1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3" BSPP Female
Side 1 suits an outside diameter (OD) of: 88.9mm
Side 2 threaded: 1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 21.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 142.68 142.68 GBP

DN80 X 20 (3" X 3/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3" BSPP Female
Side 1 suits an outside diameter (OD) of: 88.9mm
Side 2 threaded: 3/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 26.9mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 28.96 28.96 GBP

DN80 X 25 (3" X 1" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3" BSPP Female
Side 1 suits an outside diameter (OD) of: 88.9mm
Side 2 threaded: 1" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 33.4mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 23.96 23.96 GBP

DN80 X 32 (3" X 1.1/4" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3" BSPP Female
Side 1 suits an outside diameter (OD) of: 88.9mm
Side 2 threaded: 1.1/4" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 42.4mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 26.16 26.16 GBP

DN80 X 40 (3" X 1.1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3" BSPP Female
Side 1 suits an outside diameter (OD) of: 88.9mm
Side 2 threaded: 1.1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 48.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 22.28 22.28 GBP

DN80 X 50 (3" X 2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3" BSPP Female
Suits 1 suits an outside diameter (OD) of: 88.9mm
Side 2 threaded: 2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 60.3mm

Material: Malleable Iron
Finish: Galvanised

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 16.64 16.64 GBP

DN80 X 65 (3" X 2.1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 3" BSPP Female
Side 1 suits an outside diameter (OD) of: 88.9mm
Side 2 threaded: 2.1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 76.2mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 18.72 18.72 GBP

DN100 X 40 (4" X 1.1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 4" BSPP Female
Side 1 suits an outside diameter (OD) of: 114.3mm
Side 2 threaded: 1.1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 48.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 46.12 46.12 GBP

DN100 X 50 (4" X 2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 4" BSPP Female
Side 1 suits an outside diameter (OD) of: 114.3mm
Side 2 threaded: 2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 60.3mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 48.28 48.28 GBP

DN100 X 50 (4" X 2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 4" BSPP Female
Suits 1 suits an outside diameter (OD) of: 114.3mm
Side 2 threaded: 2" BSPP Female
Side 2 suits an outside diameter (OD) of: 60.3mm

Material: Malleable Iron
Finish: Galvanised

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 48.28 48.28 GBP

DN100 X 65 (4" X 2.1/2" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 4" BSPP Female
Side 1 suits an outside diameter (OD) of: 114.3mm
Side 2 threaded: 2.1/2" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 76.2mm

Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 38.92 38.92 GBP

DN100 X 80 (4" X 3" NB) BSP GALVANISED MALLEABLE IRON REDUCING BUSH

Side 1 threaded: 4" BSPP Female
Suits 1 suits an outside diameter (OD) of: 114.3mm
Side 2 threaded: 3" BSPP Female
Side 2 suits suits an outside diameter (OD) of: 88.9mm

Material: Malleable Iron
Finish: Galvanised

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Reducing Bush, Threaded, Screwed, Figure 241, Fittings.

£ 34.44 34.44 GBP