1. Products
2. Mild Steel
3. Nominal Bore
4. Fittings
5. Threaded
6. Malleable Iron (150 psi)
7. BSP Galvanised
8. Blanking Plugs

Blanking Plugs

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Threaded: 1/4" BSPT Male
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 2.59 2.59 GBP

DN8 (1/4" NB) BSP GALVANISED MALLEABLE IRON SOLID PLUG

Threaded: 1/4" BSPT Male
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 4.20 4.2 GBP

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Threaded: 3/8" BSPT Male
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 2.17 2.17 GBP

DN10 (3/8" NB) BSP GALVANISED MALLEABLE IRON SOLID PLUG

Threaded: 3/8" BSPT Male
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 4.55 4.55 GBP

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Threaded: 3/4" BSPT Male
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 2.66 2.66 GBP

DN20 (3/4" NB) BSP GALVANISED MALLEABLE IRON SOLID PLUG

Threaded: 3/4" BSPT Male
Suits an outside diameter (OD) of: 26.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 8.89 8.89 GBP

DN25 (1" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Threaded: 1" BSPT Male
Suits an outside diameter (OD) of: 33.4mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 3.78 3.78 GBP

DN25 (1" NB) BSP GALVANISED MALLEABLE IRON SOLID PLUG

Threaded: 1" BSPT Male
Suits an outside diameter (OD) of: 33.4mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 9.59 9.59 GBP

DN32 (1.1/4" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Threaded: 1.1/4" BSPT Male
Suits an outside diameter (OD) of: 42.4mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 5.25 5.25 GBP

DN32 (1.1/4" NB) BSP GALVANISED MALLEABLE IRON SOLID PLUG

Threaded: 1.1/4" BSPT Male
Suits an outside diameter (OD) of: 42.4mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 23.38 23.38 GBP

DN40 (1.1/2" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Threaded: 1.1/2" BSPT Male
Suits an outside diameter (OD) of: 48.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 6.51 6.51 GBP

DN40 (1.1/2" NB) BSP GALVANISED MALLEABLE IRON SOLID PLUG

Threaded: 1.1/2" BSPT Male
Suits an outside diameter (OD) of: 48.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 27.16 27.16 GBP

DN50 (2" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Threaded: 2" BSPT Male
Suits an outside diameter (OD) of: 60.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 4.83 4.83 GBP

DN50 (2" NB) BSP GALVANISED MALLEABLE IRON SOLID PLUG

Threaded: 2" BSPT Male
Suits an outside diameter (OD) of: 60.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 36.33 36.33 GBP

DN65 (2.1/2" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Threaded: 2.1/2" BSPT Male
Suits an outside diameter (OD) of: 76.2mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 28.14 28.14 GBP

DN80 (3" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Threaded: 3" BSPT Male
Suits an outside diameter (OD) of: 88.9mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 36.40 36.4 GBP

DN100 (4" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Both sides threaded: 4" BSPP Male
Suits an outside diameter (OD) of: 114.3mm
Material: Malleable Iron
Finish: Galvanised

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Plug, Male, Blank, Termination, Bung, Threaded, Screwed, Figure 290, Fittings.

£ 60.55 60.55 GBP

DN100 (4" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Threaded: 4" BSPT Male
Suits an outside diameter (OD) of: 114.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 60.55 60.55 GBP

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON HOLLOW PLUG

Threaded: 1/2" BSPT Male
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Hollow, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 2.38 2.38 GBP

DN15 (1/2" NB) BSP GALVANISED MALLEABLE IRON SOLID PLUG

Threaded: 1/2" BSPT Male
Suits an outside diameter (OD) of: 21.3mm
Material: Malleable Iron
Finish: Hot Dip Galvanised (HDG)

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Alternative terminology:
Malleable, Iron, Threaded, Plug, Solid, Termination, Blanking, Figure 147, Screwed, Fittings.

£ 5.81 5.81 GBP