More

12mm Wide x 12 meters long PTFE thread sealing tape.
Standard: BS 7786
Approvals: WRAS

Outside Diameter: 1/4" (6.35mm)
Wall thickness: 20 gauge (0.89mm)
Length: 30 meter coil
Annealed to BS EN12449/C106 (soft)
Maximum Working Pressure 2,244 PSI

Copper tube / pipe

Outside Diameter: 10mm OD (Metric)
Wall thickness: 1mm
Length: 10 meter coil

Copper tube / pipe

Suits an outside diameter (OD) of: 21.3mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Gasket Thickness: 3mm

Suits an outside diameter (OD) of: 26.9mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Gasket Thickness: 3mm

Suits an outside diameter (OD) of: 33.4mm or 25.4mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Bolt Holes: 4 off to suit M12 Bolts
PCD: 85mm
Flange Diameter: 115mm
Gasket Thickness: 3mm

Suits an outside diameter (OD) of: 33.4mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Gasket Thickness: 3mm

Suits an outside diameter (OD) of: 48.3mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Gasket Thickness: 3mm

Closing Range on Pipe Diameter: 54mm (Stainless Metric)
Working Pressure: 16 Bar

Part of our Flanges and Flanged Connections Range

Suits an outside diameter (OD) of: 73mm or 76.3mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Gasket Thickness: 3mm

Yellow LDPE plastic pipe cap to suit 3" NB (88.9mm od) plain end pipe.

Material: Yellow LDPE Plastic
Cap internal diameter: 89mm
Cap length: 32mm

Suits an outside diameter (OD) of: 88.9mm or 76.2mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Bolt Holes: 8 off to suit M16 Bolts
PCD: 160mm
Flange Diameter: 200mm
Gasket Thickness: 3mm

Medium-strength, general purpose thread sealant for straight/straight and straight/taper threads and fittings. Fills the space between threaded parts and seals and locks at the same time.

Closing Range on Pipe Diamter: 132mm to 146mm

10 Pack of Silicone clean up open mesh abrasive strips for cleaning / deburring rough ended pipes and fittings.

Made From A Waterproof Open Mesh Material That Is Easy To Clear Out.

Grit type: Medium 180 Grit
Dimension: 253mm long x 38mm

Flap disc diameter: 4.1/2"
Hole size: 22.2mm

Flap disc diameter: 4.1/2"
Hole size: 22.2mm

Slitting disc diameter: 4.1/2"
Thickness: 1mm
Hole size: 22.2mm

Closing Range on Pipe Diameter: 104mm (Stainless Metric)
Working Pressure: 16 Bar

Part of our Flanges and Flanged Connections Range

Closing Range on Pipe Diameter: 107-130mm
Working Pressure: 16 Bar

Outside Diameter (OD): 118mm
Wall Thickness (WT): 4.4mm
Material: Ductile Iron
Standards: EN598
Construction: Cast
Finish: Red Painted
Ends: Flanged PN16

Applications:
Waste Water Treatment Plant

Alternative terminology:
Ductile iron, Red Oxide / Epoxy, EN598, Waste, Bend, Elbow, 45°

Outside Diameter (OD): 118mm
Wall Thickness (WT): 4.4mm
Material: Ductile Iron
Standards: EN598
Construction: Cast
Finish: Red Painted
Ends: Flanged PN16

Applications:
Waste Water Treatment Plant

Alternative terminology:
Ductile iron, Red Oxide / Epoxy, EN598, Waste, Bend, Elbow, 90°

Outside Diameter (OD): 118mm
Wall Thickness (WT): 4.4mm
Material: Ductile Iron
Standards: EN598
Construction: Cast
Finish: Red Painted
Ends: Flanged PN16

Applications:
Waste Water Treatment Plant

Alternative terminology:
Ductile iron, Red Oxide / Epoxy, EN598, Waste, Bend, Elbow, 90°

Outside Diameter (OD): 118mm
Wall Thickness (WT): 4.4mm
Material: Ductile Iron
Standards: EN598
Construction: Cast
Finish: Red Painted
Ends: Flanged PN16

Applications:
Waste Water Treatment Plant

Alternative terminology:
Ductile iron, Red Oxide / Epoxy, EN598, Waste, Bend, Elbow, 90°

Outside Diameter (OD): 118mm
Wall Thickness (WT): 4.45mm
Material: Ductile Iron
Standards: EN598
Construction: Cast
Finish: Red Painted
End A: Flanged PN16
End B: Plan

Applications:
Waste Water Treatment Plant

Alternative terminology:
Ductile iron, Red Oxide / Epoxy, EN598, Waste, Straight, Spool

Suits an outside diameter (OD) of: 114.3mm, 104mm or 101.6mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Bolt Holes: 8 off to suit M16 Bolts
PCD: 180mm
Flange Diameter: 220mm
Gasket Thickness: 3mm

Suits an outside diameter (OD) of: 114.3mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Gasket Thickness: 3mm

Suits an outside diameter (OD) of: 139.7mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Gasket Thickness: 3mm

Outside Diameter (OD): 170mm
Wall Thickness (WT): 4.45mm
Material: Ductile Iron
Standards: EN598
Construction: Cast
Finish: Red Painted
Ends: Flanged PN16

Applications:
Waste Water Treatment Plant

Alternative terminology:
Ductile iron, Red Oxide / Epoxy, EN598, Waste, Bend, Elbow, 45°

Outside Diameter (OD): 170mm
Wall Thickness (WT): 4.45mm
Material: Ductile Iron
Standards: EN598
Construction: Cast
Finish: Red Painted
Ends: Flanged PN16

Applications:
Waste Water Treatment Plant

Alternative terminology:
Ductile iron, Red Oxide / Epoxy, EN598, Waste, Bend, Elbow, 90°

Suits an outside diameter (OD) of: 168.3mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Gasket Thickness: 3mm

6" X 4" Concentric Flanged Reducer
Material: Ductile Iron
Standards: EN598
Construction: Cast
Finish: Red Painted
Ends: Flanged PN16

Applications:
Waste Water Treatment Plant

Alternative terminology:
Ductile iron, Red Oxide / Epoxy, EN598, Waste, Reducer, Taper, Concentric

Suits an outside diameter (OD) of: 219.1mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Gasket Thickness: 3mm

Closing Range on Pipe Diamter: 189mm to 212mm
Working Pressure: 16 Bar
Test Pressure: 24 Bar
Adaptor Body & End Ring: Ductile Iron BS EN1563: 2011
Bolt Holes: 12 off
Mutli PCD:

8 Elongated Holes for 8" Table D & PN10
- 19mm Ø on 292mm PCD
- 23mm Ø on 299mm PCD

12 Elongated Holes for 8" PN16
- 19mm Ø on 292mm PCD
- 23mm Ø on 299mm PCD

Tee Bolts: M12 x 125mm

Note: MaxiFit Flange Adaptors DO NOT Resist End Load.

Other compatable flange drillings: ANSI/ASA125 & ANSI/ASA150.

Closing Range on Pipe Diamter: 218mm to 224mm
Working Pressure: 16 Bar
Test Pressure: 24 Bar
Adaptor Body & End Ring: Ductile Iron BS EN1563: 2011
Bolt Holes: 12 off
Mutli PCD:

8 Elongated Holes for 8" Table D & PN10
- 19mm Ø on 292mm PCD
- 23mm Ø on 299mm PCD

12 Elongated Holes for 8" PN16
- 19mm Ø on 292mm PCD
- 23mm Ø on 299mm PCD

Tee Bolts: M12 x 125mm

Note: MaxiFit Flange Adaptors DO NOT Resist End Load.

Other compatable flange drillings: ANSI/ASA125 & ANSI/ASA150.

Outside Diameter (OD): 316mm
Wall Thickness (WT): 6.6mm
Material: Ductile Iron
Standards: EN598
Construction: Cast
Finish: Red Painted
Ends: Flanged PN16

Applications:
Waste Water Treatment Plant

Alternative terminology:
Ductile iron, Red Oxide / Epoxy, EN598, Waste, Bend, Elbow, 90°

Suits an outside diameter (OD) of: 219.1mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Gasket Thickness: 3mm

Suits an outside diameter (OD) of: 273.00mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Gasket Thickness: 3mm

Suits an outside diameter (OD) of: 323.9mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Gasket Thickness: 3mm

Suits an outside diameter (OD) of: 323.8mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Bolt Holes: 12 off to suit M24 Bolts
PCD: 410mm
Flange Diameter: 460mm
Gasket Thickness: 3mm

Suits an outside diameter (OD) of: 355.6mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Bolt Holes: 12 off to suit M20 Bolts
PCD: 460mm
Flange Diameter: 505mm
Gasket Thickness: 3mm

Suits an outside diameter (OD) of: 406.4mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Bolt Holes: 16 off to suit M20 Bolts
PCD: 515mm
Flange Diameter: 565mm
Gasket Thickness: 3mm

Suits an outside diameter (OD) of: 406.4mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Bolt Holes: 16 off to suit M27 Bolts
PCD: 525mm
Flange Diameter: 580mm
Gasket Thickness: 3mm

Suits an outside diameter (OD) of: 508mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Bolt Holes: 16 off to suit M20 Bolts
PCD: 620mm
Flange Diameter: 670mm
Gasket Thickness: 3mm

To be used in conjunction with a jointing compound in order to create a watertight seal.

To be used in conjunction with a jointing compound in order to create a watertight seal.

Yellow Ochre (08C36) Semi-Gloss Gas identification paint.
5 Litre Tin Gas Pipeline Identification – Yellow Ochre Gas Pipe Paint BS 08 C 35
Colour to BS 1710 Industry Standard.

Semi-Gloss Primer & Top Coat combined.

Intended for metallic / steel surfaces.

Connection: Bottom Entry 1/2" BSPT Male
Case Material: ABS Plastic
Gauge Fill: Unfilled (Dry)
Dual Scale
Pressure range in Bar: 0 to 7 bar
Pressure range in PSI: 0 to 100 psi.

25mm Wide Roll Medium tack purging tape for smooth surfaces
UV Resistant up to 60 days
Suitable for interior and exterior use
Strong tear resistance
Temperature resistant (up to 80°c)
Clean / No residue removal
High moisture resistance

100mm Diameter Dial Bimetallic Temperature Gauge
Connection: Bottom Entry 3/8" BSPT Male
Case Material: 304 Stainless Steel
Gauge Fill: Unfilled (Dry)
Immersion: 30mm
Dual Scale
Temperature range: 0/120ºC+F Dual Scale

Accuracy
BS EN13190 - Class 2

Scales
ºC Outer (Black) ºF Inner (Red)

Connection: Bottom Entry 3/8" BSPT Male
Case Material: ABS Plastic
Gauge Fill: Unfilled (Dry)
Dual Scale
Pressure range in Bar: 0 to 10 bar
Pressure range in PSI: 0 to 160 psi.

38mm Wide Roll Medium tack purging tape for smooth surfaces
UV Resistant up to 60 days
Suitable for interior and exterior use
Strong tear resistance
Temperature resistant (up to 80°c)
Clean / No residue removal
High moisture resistance

50mm Wide Roll Medium tack purging tape for smooth surfaces
UV Resistant up to 60 days
Suitable for interior and exterior use
Strong tear resistance
Temperature resistant (up to 80°c)
Clean / No residue removal
High moisture resistance

Suits a 1" NB (33.7mm) Handrail
Finish: Self Colour
Material: MS

Suits a 1.1/4" NB (42.4mm) Handrail
Finish: Self Colour
Material: MS

Handrail Clamp Galvanised Short Tee to suit 42.4mm OD Handrail
Finish: Galvanised
Connection: Comes with Grub Screws (Allen Key)
Material: Malleable Iron

Application:
For use on galvanised handrail systems to connect Two handrails together at a 90 degree angle allowing the tube to pass through the top run of the tee.

Handrail Clamp 90° Galvanised Elbow to suit 26.9mm OD Handrail
Finish: Galvanised
Connection: Comes with Grub Screws (Allen Key)
Material: Malleable Iron

Application:
For use on galvanised handrail systems to connect Two handrails together at a 90 degree angle.

Handrail Clamp 90° Galvanised Elbow to suit 33.4mm OD Handrail
Finish: Galvanised
Connection: Comes with Grub Screws (Allen Key)
Material: Malleable Iron

Application:
For use on galvanised handrail systems to connect Two handrails together at a 90 degree angle.

Handrail Clamp 90° Galvanised Elbow to suit 42.4mm OD Handrail
Finish: Galvanised
Connection: Comes with Grub Screws (Allen Key)
Material: Malleable Iron

Application:
For use on galvanised handrail systems to connect Two handrails together at a 90 degree angle.

Handrail Clamp Single Mesh Clip to suit 33.4mm OD Handrail
Finish: Galvanised
Connection: Comes with fasteners to secure in place
Material: Malleable Iron

Application:
For use on galvanised handrail systems to connect a mesh panel to the handrail on one side.

Handrail Clamp Single Mesh Clip to suit 42.4mm OD Handrail
Finish: Galvanised
Connection: Comes with fasteners to secure in place
Material: Malleable Iron

Application:
For use on galvanised handrail systems to connect a mesh panel to the handrail on one side.

Handrail Clamp Double Mesh Clip to suit 33.4mm OD Handrail
Finish: Galvanised
Connection: Comes with fasteners to secure in place
Material: Malleable Iron

Application:
For use on galvanised handrail systems to connect a mesh panel to the handrail on both sides.

Handrail Clamp Double Mesh Clip to suit 42.4mm OD Handrail
Finish: Galvanised
Connection: Comes with fasteners to secure in place
Material: Malleable Iron

Application:
For use on galvanised handrail systems to connect a mesh panel to the handrail on both sides.

Handrail Clamp D Return end of rail bend to suit 42.4mm OD Handrail with 550mm Centres
Finish: Galvanised
Connection: Plain end to cut to length
Material: Mild Steel

Application:
For use on galvanised handrail systems to connect a mesh panel to the handrail on one side.

Handrail Clamp K40 Kickplate toe clamp to suit 42.4mm OD Handrail
Finish: Galvanised
Connection: Comes with grub screw to secure in place
Material: Malleable Iron

Application:
For use on galvanised handrail systems to connect kick plate board to the handrail standards.

Handrail Standard / Stanchion / Stick with Flat Base
Balls to suit a 33.7mm OD Handrail
Ball Size: 60mm Diameter
Ball centres: 550 x 550mm
Finish: Galvanised
Connection: Comes with Grub Screws (Allen Key Required)
Material: MS

Handrail Standard / Stanchion / Stick with Flat Base
Balls to suit a 42.4mm OD Handrail
Ball Size: 60mm Diameter
Ball centres: 550 x 550mm
Finish: Galvanised
Connection: Comes with Grub Screws (Allen Key Required)
Material: MS

Handrail Standard / Stanchion / Stick with Side Base
Balls to suit a 33.7mm OD Handrail
Ball centres 550 x 550mm
Finish: Galvanised
Connection: Comes with Grub Screws (Allen Key Required)
Material: MS

Handrail Standard / Stanchion / Stick with Side Base
Balls to suit a 42.4mm OD Handrail
Ball centres 550 x 550mm
Finish: Galvanised
Connection: Comes with Grub Screws (Allen Key Required)
Material: MS

Loctite 55 is a new, faster, more versatile pipe sealant which out-dates traditional tapes and hemp/paste combinations. It instantly seals (irrespective of ambient temperature) domestic and industrial pipe systems during assembly. Can be safely and confidently used with drinking or waste water (hot or cold), gas, compressed air, and industrial oils. Supplied in a handy, pocket sized, protective container complete with built in cutter. WRC listed for use with potable water.

Medium-strength, general purpose thread sealant for straight/straight and straight/taper threads and fittings. Fills the space between threaded parts and seals and locks at the same time.

Zinga cold galvanising zinc rich paint for use on metal pipework.